Guitarman9119
commented
2 years ago Hi PeregrineXII
Thank you. I will quickly have a look to see what is going on and get back to you.
On Thu, Jun 16, 2022 at 8:12 PM PeregrineXII @.***> wrote:
Let me start by saying thanks for sharing this project! I was trying to get the No I2C version of the board fabbed by JLCPCB and they contacted me with what they thought might be an error in the board. The asked, "As shown below, there is no pad and hole for the indicated trace, is that normal?" I included the image they sent below. I thought you might want a heads up in case perhaps you had not tried to have this version fabbed. I'm an admitted noob at PCB design, so I can't address the question one way or the other. I'm going to switch my order to the I2C version and see what happens. Thanks again for sharing your work, I'm very excited to build this project!
[image: NoI2CError] https://user-images.githubusercontent.com/107624288/174066222-a6954590-9161-4da9-865b-ae64c48babac.png
— Reply to this email directly, view it on GitHub https://github.com/Guitarman9119/Raspberry-Pi-Pico-/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADNDO5O4X75SNIN5SVJUADDVPMK2PANCNFSM5Y6S4FKA . You are receiving this because you are subscribed to this thread.Message ID: @.***>
PeregrineXII
Let me start by saying thanks for sharing this project! I was trying to get the No I2C version of the board fabbed by JLCPCB and they contacted me with what they thought might be an error in the board. The asked, "As shown below, there is no pad and hole for the indicated trace, is that normal?" I included the image they sent below. I thought you might want a heads up in case perhaps you had not tried to have this version fabbed. I'm an admitted noob at PCB design, so I can't address the question one way or the other. I'm going to switch my order to the I2C version and see what happens. Thanks again for sharing your work, I'm very excited to build this project!