Hi,
it will be quite goot to change the tuning mode via the 4 Dip switches on the
side of the copter. So we can make 4^2 = 16 tune Mode positions.
So you do not need an PC to change this and you can check different tune parts
on the fild, and at home you can set the values, by marking the points on your
Radio or moving it with trimming and reminde the value on your Computer Radio
System.
tune 0 = no tuning.
tune 1 = STABILIZE_KP
tune 2 = STABILIZE_KI
tune 3 = Yaw_KP
tune 4 = RATE_KP
tune 5 = RATE_KI
tune 6 = YAW_RATE_KP
tune 7 = THROTTLE_KP
tune 8 = TOP_BOTTOM_RATIO (for Y6)
tune 9 = Manual control of the relay
tune 10 = Waypoint traversing speed (0m/s to 10m/s)
Original issue reported on code.google.com by druckgott on 13 Oct 2011 at 6:41
Original issue reported on code.google.com by
druckgott
on 13 Oct 2011 at 6:41