search

Guitarmath / arducopter

Automatically exported from code.google.com/p/arducopter
0 stars 0 forks source link

Swashplate H4 #400

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
Hi,
I bought ArduPilot Mega kit. Unfortunately you can set the mode on the 
swashplate servos with 4 to 90 degrees. What should I do? I enclose a drawing 
of the head.
Best regards
Alberto

Original issue reported on code.google.com by alb_pag...@yahoo.it on 6 Apr 2012 at 3:03

GoogleCodeExporter commented 8 years ago 
I think Robert's looking at this one.

Original comment by rmackay...@gmail.com on 10 Apr 2012 at 2:21

GoogleCodeExporter commented 8 years ago 
Yes, I am.  I left a few questions for him on the forum.  Need to know which 
Channel out he would like to use.  He'll either have to give up another 
function, or use one of the Aux pins like 10 or 11.

Original comment by robert.lefebvre on 10 Apr 2012 at 2:23

GoogleCodeExporter commented 8 years ago

Original comment by robert.lefebvre on 12 May 2012 at 11:17

GoogleCodeExporter commented 8 years ago

Original comment by robert.lefebvre on 12 May 2012 at 11:18

GoogleCodeExporter commented 8 years ago

Original comment by robert.lefebvre on 12 May 2012 at 11:18

GoogleCodeExporter commented 8 years ago 
I would prefer the use of channel 10 or 11 not knowing what kind of work should 
be done

Original comment by alb_pag...@yahoo.it on 13 May 2012 at 8:57

GoogleCodeExporter commented 8 years ago 
It's actually looking like I'm going to use channel 7. If you have APM2, it 
will be easy to use, and give up nothing as the Ext. Gyro is on Ch5.  If you 
have APM1, unfortunately you will lose the option of Ext. Gyro.  I think this 
is the lesser of 2 evils, since you don't really need an ext. gyro anyway.  
Using channels 10 or 11 would be a big annoyance, as you'd essentially have to 
solder a servo wire to power, ground, and the signal pin on the side of the 
board.

Original comment by robert.lefebvre on 13 May 2012 at 9:56

GoogleCodeExporter commented 8 years ago 
I unfortunately APM 1 and would prefer not to give up around the outside. Where 
I can see the steps to use the channels 10 and 11?

Original comment by alb_pag...@yahoo.it on 14 May 2012 at 6:16

GoogleCodeExporter commented 8 years ago 
So does the code support a H4 swashplate now?

Original comment by zacharyb...@gmail.com on 6 Sep 2012 at 6:11

GoogleCodeExporter commented 8 years ago 
Uh, I think it did, but somewhere it got lost as there was nobody around to 
test it.  Do you have hardware?

Original comment by robert.lefebvre on 6 Sep 2012 at 6:22

GoogleCodeExporter commented 8 years ago 
I have a bird, but was holding off on purchasing an APM board. Now I'll have to 
acquire one so this can get tested.

Original comment by zacharyb...@gmail.com on 6 Sep 2012 at 7:08

GoogleCodeExporter commented 8 years ago 
Is this for a big Vario?  Personally, I don't recommend you try it on something 
big and expensive at this point.  We're having problems dealing with vibrations 
on helicopters.  I wouldn't like to see somebody use it on a huge heli at this 
point.

Original comment by robert.lefebvre on 6 Sep 2012 at 7:23

GoogleCodeExporter commented 8 years ago 
Unfortunately, it's big. Do you have a link or two for reading on the vibration 
issues?

Original comment by zacharyb...@gmail.com on 6 Sep 2012 at 7:45

GoogleCodeExporter commented 8 years ago 
Closing all issues on the old issues list by marking them WontFix.

If this is still a valid issue please re-raise it on the new GitHub issues 
list: https://github.com/diydrones/ardupilot/issues

Thanks!

Original comment by rmackay...@gmail.com on 21 Jul 2013 at 2:14