After error, run: `./run/resegment/copy_ad_hy_sc YL0_7012_7010 YL2_6580_0001 cbp-6.1 subsheds
which copies from a different template YL2_6580_0001
Re-Doing is often needed, if you get the drainage area wrong, or need to change the target for alternative downstream riverine parameters, or if the script was updated and you need new things.
You must use the new hydrocode (minus the vahydrosw_wshed prefix) when calling the script.
Ex:
First time I called: ./run/resegment/add_sub_watershed.bat JB0_7050_0000_little_creek JB0_7050_0000 cbp-6.1 subsheds 5.098 JB0_7052_0001 blank
Next time called: ./run/resegment/add_sub_watershed.bat JB0_7056_7050 JB0_7050_0000 cbp-6.1 subsheds 5.098 JB0_7052_0001 blank
Todo:
Overview:
./run/resegment/add_sub_watershed.bat [subshed hydrocode] [downstream rseg] cbp-6.0 subsheds [da]
copy_ad_hy_sc
separately (called byadd_sub_watershed.bat
) with a different watershed as template for parameters../run/resegment/add_sub_watershed.bat YL0_7010_0000_beaverdam YL0_7010_0000 cbp-6.1 subsheds 17.57
YL2_6580_0001
vahydrosw_wshed
prefix) when calling the script../run/resegment/add_sub_watershed.bat JB0_7050_0000_little_creek JB0_7050_0000 cbp-6.1 subsheds 5.098 JB0_7052_0001 blank
./run/resegment/add_sub_watershed.bat JB0_7056_7050 JB0_7050_0000 cbp-6.1 subsheds 5.098 JB0_7052_0001 blank