elik745i
commented
1 year ago I have figured it out, dont know write way or not but touch working now.
What needs to be done: 1) Create file in user_setups folder, name it esp32-2432s024.ini `;; ; Sunton ESP32-WROOM custom dev board with ; ; - ILI9341 TFT SPI 4-WIRE ; ; - XPT2046 or CST820 touch controller ; ;;
[esp32-2432s024] extends = arduino_esp32_v2 board = esp32dev
build_flags = ${arduino_esp32_v2.build_flags} ${esp32.no_ps_ram}
;region -- TFT_eSPI build options ------------------------ ${esp32.hspi} ; Use HSPI hardware SPI bus -D ILI9341_DRIVER=1 -D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree -D TFT_WIDTH=240 -D TFT_HEIGHT=320 -D TFT_CS=15 ;// Chip select control pin -D TFT_DC=2 ;// Data Command control pin -D TFT_RST=-1 ;// Reset pin (could connect to RST pin) -D TFT_BCKL=27 ;None, configurable via web UI (e.g. 2 for D4) -D SUPPORT_TRANSACTIONS -D SPI_FREQUENCY=65000000 -D SPI_READ_FREQUENCY=20000000 ;endregion
; -- Debugging options ----------------------------- ; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
[env:esp32-2432s024r_4MB] extends = esp32-2432s024, flash_4mb build_flags = ${esp32-2432s024.build_flags} -D USER_SETUP_LOADED=1 -D TOUCH_CS=33 -D TOUCH_DRIVER=0x2046 ; XPT2606 Resistive touch panel driver -D HASP_USE_LGFX_TOUCH=1 -D TOUCH_SDA=-1 -D TOUCH_SCL=-1 -D TOUCH_IRQ=-1 -D I2C_TOUCH_PORT=0 -D I2C_TOUCH_ADDRESS=0 -D I2C_TOUCH_FREQUENCY=0 -D SPI_TOUCH_FREQUENCY=2500000
lib_deps = ${esp32-2432s024.lib_deps} ${tft_espi.lib_deps} ;${lovyangfx.lib_deps}
[env:esp32-2432s024c_4MB] extends = esp32-2432s024, flash_4mb board = esp32dev
build_flags = ${esp32-2432s024.build_flags} ${esp32.no_ps_ram}
;region -- TFT_eSPI build options ------------------------
${esp32.hspi} ; Use HSPI hardware SPI bus
;-D USER_SETUP_LOADED=1
-D LGFX_USE_V1=1
-D ILI9341_DRIVER=1
-D TOUCH_DRIVER=0x0820 ; CST820 Capacitive I2C touch panel driver
-D HASP_USE_LGFX_TOUCH=1
-D TFT_ROTATION=2 ; 0=0, 1=90, 2=180 or 3=270 degree
-D TFT_WIDTH=240
-D TFT_HEIGHT=320
-D TFT_CS=15 ;// Chip select control pin
-D TFT_DC=2 ;// Data Command control pin
-D TFT_RST=-1 ;// Reset pin (could connect to RST pin)
-D TFT_BCKL=27 ;None, configurable via web UI (e.g. 2 for D4)
-D SUPPORT_TRANSACTIONS
-D TOUCH_SDA=33
-D TOUCH_SCL=32
-D TOUCH_IRQ=21
-D TOUCH_OFFSET_ROTATION=2 ;touch rotation
;-D TOUCH_IRQ=-1
-D TOUCH_RST=25
-D I2C_TOUCH_FREQUENCY=400000
-D I2C_TOUCH_PORT=1
-D I2C_TOUCH_ADDRESS=0x15 ; or 0x14
-D SPI_FREQUENCY=65000000
-D SPI_TOUCH_FREQUENCY=2500000
-D SPI_READ_FREQUENCY=20000000
;endregion
; -- Debugging options ----------------------------- ; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
lib_deps =
${esp32-2432s024.lib_deps}
;${tft_espi.lib_deps}
${lovyangfx.lib_deps}
;${goodix.lib_deps}
change tft_driver_lovyangfx.cpp to this: / MIT License - Copyright (c) 2019-2023 Francis Van Roie
For full license information read the LICENSE file in the project folder /
if defined(ARDUINO) && defined(LGFX_USE_V1)
include
include
include
include "LovyanGFX.hpp"
// #if defined(ESP32S3)
include "lgfx/v1/platforms/esp32s3/Panel_RGB.hpp"
include "lgfx/v1/platforms/esp32s3/Bus_RGB.hpp"
// #endif
include "tft_driver.h"
include "tft_driver_lovyangfx.h"
include "Panel_ILI9481b.hpp"
include "M5Stack.hpp"
namespace dev {
void tftPinInfo(const __FlashStringHelper* pinfunction, int8_t pin) { if(pin != -1) { char buffer[64]; snprintf_P(buffer, sizeof(buffer), PSTR("%-12s: %s (GPIO %02d)"), String(pinfunction).c_str(), haspDevice.gpio_name(pin).c_str(), pin); LOG_VERBOSE(TAG_TFT, buffer); } }
static void _pin_level(int_fast16_t pin, bool level) { lgfx::pinMode(pin, lgfx::pin_mode_t::output); if(level) lgfx::gpio_hi(pin); else lgfx::gpio_lo(pin); }
static uint32_t _read_panel_id(lgfx::Bus_SPI* bus, int32_t pin_cs, uint32_t cmd = 0x04, uint8_t dummy_read_bit = 1) // 0x04 = RDDID command { bus->beginTransaction(); _pin_level(pin_cs, true); bus->writeCommand(0, 8); bus->wait(); _pin_level(pin_cs, false); bus->writeCommand(cmd, 8); if(dummy_read_bit) bus->writeData(0, dummy_read_bit); // dummy read bit bus->beginRead(); uint32_t res = bus->readData(32); bus->endTransaction(); _pin_level(pin_cs, true);
LOG_VERBOSE(TAG_TFT, "[Autodetect] read cmd:%u = %u", cmd, res);
return res;}
if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
static lgfx::Bus_Parallel16 init_parallel_16_bus(Preferences prefs, int8_t data_pins[], uint8_t num) { lgfx::Bus_Parallel16* bus = new lgfx::v1::Bus_Parallel16(); auto cfg = bus->config(); cfg.pin_rd = prefs->getInt("rd", TFT_RD); cfg.pin_wr = prefs->getInt("wr", TFT_WR); cfg.pin_rs = prefs->getInt("rs", TFT_DC); cfg.freq_write = prefs->getUInt("write_freq", SPI_FREQUENCY);
if !defined(CONFIG_IDF_TARGET_ESP32S3)
uint8_t port = prefs->getUInt("i2s_port", 0);
switch(port) {if SOC_I2S_NUM > 1
case 1:
cfg.i2s_port = I2S_NUM_1;
break;endif
default:
cfg.i2s_port = I2S_NUM_0;
}endif
for(uint8_t i = 0; i < num; i++) {
cfg.pin_data[i] = data_pins[i];
}
bus->config(cfg); // The set value is reflected on the bus.
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
return bus;}
endif // ESP32S2/S3
static lgfx::Bus_Parallel8 init_parallel_8_bus(Preferences prefs, int8_t data_pins[], uint8_t num) { lgfx::Bus_Parallel8* bus = new lgfx::v1::Bus_Parallel8(); auto cfg = bus->config(); cfg.pin_rd = prefs->getInt("rd", TFT_RD); cfg.pin_wr = prefs->getInt("wr", TFT_WR); cfg.pin_rs = prefs->getInt("rs", TFT_DC); cfg.freq_write = prefs->getUInt("write_freq", SPI_FREQUENCY);
if !defined(CONFIG_IDF_TARGET_ESP32S3)
uint8_t port = prefs->getUInt("i2s_port", 0);
switch(port) {if SOC_I2S_NUM > 1
case 1:
cfg.i2s_port = I2S_NUM_1;
break;endif
default:
cfg.i2s_port = I2S_NUM_0;
}endif
for(uint8_t i = 0; i < num; i++) {
cfg.pin_data[i] = data_pins[i];
}
bus->config(cfg); // The set value is reflected on the bus.
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
return bus;}
static lgfx::Bus_SPI init_spi_bus(Preferences prefs) { lgfx::Bus_SPI* bus = new lgfx::v1::Bus_SPI(); auto cfg = bus->config(); cfg.pin_miso = prefs->getInt("miso", TFT_MISO); cfg.pin_mosi = prefs->getInt("mosi", TFT_MOSI); cfg.pin_sclk = prefs->getInt("sclk", TFT_SCLK); cfg.pin_dc = prefs->getInt("dc", TFT_DC); cfg.spi_3wire = prefs->getBool("3wire", false); cfg.use_lock = prefs->getBool("use_lock", true); cfg.freq_write = prefs->getUInt("write_freq", SPI_FREQUENCY); cfg.freq_read = prefs->getUInt("read_freq", SPI_READ_FREQUENCY); cfg.dma_channel = prefs->getUInt("dma_channel", TFT_DMA_CHANNEL); cfg.spi_mode = prefs->getUInt("spi_mode", TFT_SPI_MODE); uint8_t host = prefs->getUInt("host", TFT_SPI_HOST); LOG_DEBUG(TAG_TFT, F("%s - %d"), FILE, LINE);
// #if CONFIG_IDF_TARGET_ESP32C3
// #define FSPI 0
// #define HSPI 1
// #else
// #define FSPI 1 // SPI bus attached to the flash (can use the same data lines but different SS)
// #define HSPI 2 // SPI bus normally mapped to pins 12 - 15, but can be matrixed to any pins
// #if CONFIG_IDF_TARGET_ESP32
// #define VSPI 3 // SPI bus normally attached to pins 5, 18, 19 and 23, but can be matrixed to any pins
// #endif
// #endif
// //alias for different chips, deprecated for the chips after esp32s2
// #ifdef CONFIG_IDF_TARGET_ESP32
// #define SPI_HOST SPI1_HOST
// #define HSPI_HOST SPI2_HOST
// #define VSPI_HOST SPI3_HOST
// #elif CONFIG_IDF_TARGET_ESP32S2
// // SPI_HOST (SPI1_HOST) is not supported by the SPI Master and SPI Slave driver on ESP32-S2 and later
// #define SPI_HOST SPI1_HOST
// #define FSPI_HOST SPI2_HOST
// #define HSPI_HOST SPI3_HOST
// #endif
switch(host) {ifdef CONFIG_IDF_TARGET_ESP32
case 1:
// SPI_HOST (SPI1_HOST) is not supported by the SPI Master and SPI Slave driver on ESP32-S2 and later
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
cfg.spi_host = SPI_HOST;
break;endif
case 2: // HSPI on ESP32 and FSPI on ESP32-S2
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);ifdef CONFIG_IDF_TARGET_ESP32
cfg.spi_host = HSPI_HOST;elif CONFIG_IDF_TARGET_ESP32S2
cfg.spi_host = FSPI_HOST;endif
break;
case 3:
default: // VSPI on ESP32 and HSPI on ESP32-S2
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);ifdef CONFIG_IDF_TARGET_ESP32
cfg.spi_host = VSPI_HOST;elif CONFIG_IDF_TARGET_ESP32S2
cfg.spi_host = HSPI_HOST;endif
}
bus->config(cfg); // The set value is reflected on the bus.
bus->init();
return bus;}
static void configure_panel(lgfx::Panel_Device panel, Preferences prefs) { auto cfg = panel->config(); // Get the structure for display panel settings.
cfg.pin_cs = prefs->getInt("cs", TFT_CS); // CS required
cfg.pin_rst = prefs->getInt("rst", TFT_RST); // RST sum development board RST linkage
cfg.pin_busy = prefs->getInt("busy", TFT_BUSY); // Pin number to which BUSY is connected (-1 = disable)
// The following setting values are set to general initial values for each panel, so please comment out any unknown
// items and try them.
cfg.panel_width = prefs->getUInt("panel_width", TFT_WIDTH); // Actually displayable width
cfg.panel_height = prefs->getUInt("panel_height", TFT_HEIGHT); // Height that can actually be displayed
cfg.memory_width = prefs->getUInt("memory_width", cfg.panel_width); // Maximum width supported by driver IC
cfg.memory_height = prefs->getUInt("memory_height", cfg.panel_height); // Maximum height supported by driver IC
cfg.offset_x = prefs->getUInt("offset_x", 0); // Amount of offset in the X direction of the panel
cfg.offset_y = prefs->getUInt("offset_y", 0); // Amount of offset in the Y direction of the panel
cfg.offset_rotation =
prefs->getUInt("offset_rotation", TFT_OFFSET_ROTATION); // Offset of the rotation 0 ~ 7 (4 ~ 7 is upside down)
cfg.dummy_read_pixel = prefs->getUInt("dummy_read_pixel", 8); // Number of dummy read bits before pixel read
cfg.dummy_read_bits =
prefs->getUInt("dummy_read_bits", 1); // bits of dummy read before reading data other than pixels
cfg.readable = prefs->getBool("readable", false); // true if data can be readifdef INVERT_COLORS // This is configurable un Web UI
cfg.invert =
prefs->getBool("invert", INVERT_COLORS != 0); // true if the light and darkness of the panel is reversedelse
cfg.invert = prefs->getBool("invert", false); // true if the light and darkness of the panel is reversedendif
ifdef TFT_RGB_ORDER
cfg.rgb_order =
prefs->getBool("rgb_order", TFT_RGB_ORDER != 0); // true if the red and blue of the panel are swappedelse
cfg.rgb_order = prefs->getBool("rgb_order", false); // true if the red and blue of the panel are swappedendif
bool dlen_16bit = false;if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
if(panel->getBus()) {
lgfx::v1::bus_type_t bus_type = panel->getBus()->busType();
if(bus_type == lgfx::v1::bus_parallel16) dlen_16bit = true;
}endif
cfg.dlen_16bit = prefs->getBool("dlen_16bit", dlen_16bit); // true for panels that send data length in 16-bit units
cfg.bus_shared = prefs->getBool("bus_shared", true); // true if the bus is shared with the SD card
// (bus control is performed with drawJpgFile etc.)
panel->config(cfg);}
// Initialize the bus lgfx::IBus _init_bus(Preferences preferences) { if(!preferences) return nullptr;
char key[8];
int8_t data_pins[16] = {TFT_D0, TFT_D1, TFT_D2, TFT_D3, TFT_D4, TFT_D5, TFT_D6, TFT_D7,
TFT_D8, TFT_D9, TFT_D10, TFT_D11, TFT_D12, TFT_D13, TFT_D14, TFT_D15};
for(uint8_t i = 0; i < 16; i++) {
snprintf(key, sizeof(key), "d%d", i + 1);
data_pins[i] = preferences->getInt(key, data_pins[i]);
LOG_DEBUG(TAG_TFT, F("D%d: %d"), i, data_pins[i]);
}
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
bool is_8bit = true;
bool is_16bit = true;
for(uint8_t i = 0; i < 16; i++) {
if(i < 8) is_8bit = is_8bit && (data_pins[i] >= 0);
is_16bit = is_16bit && (data_pins[i] >= 0);
}
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
if(is_16bit) {
is_8bit = false;
LOG_VERBOSE(TAG_TFT, F("16-bit TFT bus"));
return init_parallel_16_bus(preferences, data_pins, 16);
} elseendif // ESP32S2/S3
if(is_8bit) {
is_16bit = false;
LOG_VERBOSE(TAG_TFT, F("8-bit TFT bus"));
return init_parallel_8_bus(preferences, data_pins, 8);
} else {
LOG_VERBOSE(TAG_TFT, F("SPI TFT bus"));
return init_spi_bus(preferences);
}
return nullptr;}
lgfx::Panel_Device LovyanGfx::_init_panel(lgfx::IBus bus) { lgfx::Panel_Device* panel = nullptr; switch(tft_driver) { case TFT_PANEL_ILI9341: { panel = new lgfx::Panel_ILI9341(); LOG_VERBOSE(TAG_TFT, F("Panel_ILI9341")); break; } case TFT_PANEL_ILI9342: { panel = new lgfx::Panel_ILI9342(); LOG_VERBOSE(TAG_TFT, F("Panel_ILI9342")); break; } case TFT_PANEL_R61529: case TFT_PANEL_ILI9481: { panel = new lgfx::Panel_ILI9481_b(); LOG_VERBOSE(TAG_TFT, F("Panel_ILI9481_b")); break; } case TFT_PANEL_ILI9486: { panel = new lgfx::Panel_ILI9486(); LOG_VERBOSE(TAG_TFT, F("Panel_ILI9486")); break; } case TFT_PANEL_ILI9488: { panel = new lgfx::Panel_ILI9488(); LOG_VERBOSE(TAG_TFT, F("Panel_ILI9488")); break; } case TFT_PANEL_ST7789: { panel = new lgfx::Panel_ST7789(); LOG_VERBOSE(TAG_TFT, F("Panel_ST7789")); break; } case TFT_PANEL_ST7796: { panel = new lgfx::Panel_ST7796(); LOG_VERBOSE(TAG_TFT, F("Panel_ST7796")); break; } case TFT_PANEL_HX8357D: { panel = new lgfx::Panel_HX8357D(); LOG_VERBOSE(TAG_TFT, F("Panel_HX8357D")); break; } case TFT_PANEL_RGB: { // panel = new lgfx::Panel_RGB(); LOG_VERBOSE(TAG_TFT, F("Panel_RGB")); break; } default: { // Needs to be in curly braces LOG_FATAL(TAG_TFT, F(D_SERVICE_START_FAILED ": %s line %d"), FILE, LINE); } }
return panel;}
lgfx::ITouch _init_touch(Preferences preferences) { // lgfx::ITouch* touch = nullptr; // switch(tft_driver) { // default: // case 0x9341: { // break; // }
if defined(HASP_USE_LGFX_TOUCH)
if TOUCH_DRIVER == 0x0911
{ // タッチスクリーン制御の設定を行います。（必要なければ削除）
auto touch = new lgfx::Touch_GT911();
auto cfg = touch->config();
cfg.x_min = 0; // タッチスクリーンから得られる最小のX値(生の値)
cfg.x_max = TFT_WIDTH - 1; // タッチスクリーンから得られる最大のX値(生の値)
cfg.y_min = 0; // タッチスクリーンから得られる最小のY値(生の値)
cfg.y_max = TFT_HEIGHT - 1; // タッチスクリーンから得られる最大のY値(生の値)
cfg.bus_shared = false; // 画面と共通のバスを使用している場合 trueを設定
cfg.offset_rotation = TOUCH_OFFSET_ROTATION; // 表示とタッチの向きのが一致しない場合の調整 0~7の値で設定
// I2C接続の場合
cfg.i2c_port = I2C_TOUCH_PORT; // 使用するI2Cを選択 (0 or 1)
cfg.i2c_addr = I2C_TOUCH_ADDRESS; // I2Cデバイスアドレス番号
cfg.pin_sda = TOUCH_SDA; // SDAが接続されているピン番号
cfg.pin_scl = TOUCH_SCL; // SCLが接続されているピン番号
cfg.pin_int = TOUCH_IRQ; // INTが接続されているピン番号
cfg.freq = I2C_TOUCH_FREQUENCY; // I2Cクロックを設定
touch->config(cfg);
return touch;
}endif
if TOUCH_DRIVER == 0x0820
{ // タッチスクリーン制御の設定を行います。（必要なければ削除）
auto touch = new lgfx::Touch_FT5x06();
auto cfg = touch->config();
cfg.x_min = 0; // The minimum X value obtained from the touchscreen (raw value).
cfg.x_max = TFT_WIDTH - 1; // The maximum X value obtained from the touchscreen (raw value).
cfg.y_min = 0; // The minimum Y value obtained from the touchscreen (raw value).
cfg.y_max = TFT_HEIGHT - 1; // The maximum Y value obtained from the touchscreen (raw value).
cfg.bus_shared = true; // If using a common bus with the screen, set it to true.
cfg.offset_rotation = TOUCH_OFFSET_ROTATION; // Adjustment when the display orientation does not match the touch orientation. Set in values from 0 to 7.
// I2C接続の場合
cfg.i2c_port = I2C_TOUCH_PORT; // 使用するI2Cを選択 (0 or 1)
cfg.i2c_addr = I2C_TOUCH_ADDRESS; // I2Cデバイスアドレス番号
cfg.pin_sda = TOUCH_SDA; // SDAが接続されているピン番号
cfg.pin_scl = TOUCH_SCL; // SCLが接続されているピン番号
cfg.pin_int = TOUCH_IRQ; // INTが接続されているピン番号
cfg.freq = I2C_TOUCH_FREQUENCY; // I2Cクロックを設定
touch->config(cfg);
return touch;
}endif
if TOUCH_DRIVER == 0x6336
{
auto touch = new lgfx::Touch_FT5x06();
auto cfg = touch->config();
cfg.x_min = 0;
cfg.x_max = TFT_WIDTH - 1;
cfg.y_min = 0;
cfg.y_max = TFT_HEIGHT - 1;
cfg.pin_int = TOUCH_IRQ;
cfg.bus_shared = true;
cfg.offset_rotation = TOUCH_OFFSET_ROTATION;
// SPI接続の場合
// cfg.spi_host = VSPI_HOST; // 使用するSPIを選択 (HSPI_HOST or VSPI_HOST)
// cfg.freq = 1000000; // SPIクロックを設定
// cfg.pin_sclk = 18; // SCLKが接続されているピン番号
// cfg.pin_mosi = 23; // MOSIが接続されているピン番号
// cfg.pin_miso = 19; // MISOが接続されているピン番号
// cfg.pin_cs = 5; // CSが接続されているピン番号
// I2C接続の場合
cfg.i2c_port = I2C_TOUCH_PORT;
cfg.i2c_addr = I2C_TOUCH_ADDRESS;
cfg.pin_sda = TOUCH_SDA;
cfg.pin_scl = TOUCH_SCL;
cfg.freq = I2C_TOUCH_FREQUENCY;
touch->config(cfg);
return touch;
}endif
if TOUCH_DRIVER == 0x2046
{
auto touch = new lgfx::Touch_XPT2046();
auto cfg = touch->config();
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
cfg.bus_shared = true;
cfg.offset_rotation = 0;
cfg.spi_host = SPI3_HOST;
// cfg.pin_sclk = 18;
// cfg.pin_mosi = 23;
// cfg.pin_miso = 19;
// cfg.pin_cs = 21;
// cfg.pin_int = GPIO_NUM_NC;
cfg.pin_sclk = TOUCH_SCLK;
cfg.pin_miso = TOUCH_MISO;
cfg.pin_mosi = TOUCH_MOSI;
cfg.pin_cs = TOUCH_CS;
cfg.pin_int = TOUCH_IRQ;
touch->config(cfg);
return touch;
}endif
if TOUCH_DRIVER == 0x21100
{
auto touch = new lgfx::Touch_TT21xxx();
auto cfg = touch->config();
cfg.x_min = 0;
cfg.x_max = TFT_WIDTH - 1;
cfg.y_min = 0;
cfg.y_max = TFT_HEIGHT - 1;
cfg.pin_int = TOUCH_IRQ;
cfg.bus_shared = true;
cfg.offset_rotation = TOUCH_OFFSET_ROTATION;
// I2C接続の場合
cfg.i2c_port = I2C_TOUCH_PORT;
cfg.i2c_addr = I2C_TOUCH_ADDRESS;
cfg.pin_sda = TOUCH_SDA;
cfg.pin_scl = TOUCH_SCL;
cfg.freq = I2C_TOUCH_FREQUENCY;
touch->config(cfg);
return touch;
}endif
endif // HASP_USE_LGFX_TOUCH
return nullptr;}
void LovyanGfx::init(int w, int h) { LOG_TRACE(TAG_TFT, F(D_SERVICE_STARTING));
if defined(WTSC01PLUS)
auto _panel_instance = new lgfx::Panel_ST7796();
auto _bus_instance = new lgfx::v1::Bus_Parallel8();
auto _touch_instance = new lgfx::Touch_FT5x06();
{
auto cfg = _bus_instance->config();
cfg.freq_write = 20000000;
cfg.pin_wr = 47;
cfg.pin_rd = -1;
cfg.pin_rs = 0;
cfg.pin_d0 = 9;
cfg.pin_d1 = 46;
cfg.pin_d2 = 3;
cfg.pin_d3 = 8;
cfg.pin_d4 = 18;
cfg.pin_d5 = 17;
cfg.pin_d6 = 16;
cfg.pin_d7 = 15;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _panel_instance->config();
cfg.pin_cs = -1;
cfg.pin_rst = 4;
cfg.pin_busy = -1;
cfg.panel_width = 320;
cfg.panel_height = 480;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = 0;
cfg.dummy_read_pixel = 8;
cfg.dummy_read_bits = 1;
cfg.readable = true;
cfg.invert = true;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = true;
_panel_instance->config(cfg);
}
{
auto cfg = _touch_instance->config();
cfg.x_min = 0;
cfg.x_max = 319;
cfg.y_min = 0;
cfg.y_max = 479;
cfg.pin_int = 7;
cfg.bus_shared = true;
cfg.offset_rotation = 0;
cfg.i2c_port = 1;
cfg.i2c_addr = 0x38;
cfg.pin_sda = 6;
cfg.pin_scl = 5;
cfg.freq = 400000;
_touch_instance->config(cfg);
_panel_instance->setTouch(_touch_instance);
}elif 0 && defined(LILYGOPI)
auto _panel_instance = new lgfx::Panel_ST7796();
auto _bus_instance = new lgfx::Bus_SPI();
auto _touch_instance = new lgfx::Touch_FT5x06();
{
auto cfg = _bus_instance->config();
cfg.spi_host = VSPI_HOST;
cfg.spi_mode = 0;
cfg.freq_write = 40000000;
cfg.freq_read = 16000000;
cfg.spi_3wire = false;
cfg.use_lock = true;
cfg.dma_channel = 1;
cfg.pin_sclk = 18;
cfg.pin_mosi = 19;
cfg.pin_miso = 23;
cfg.pin_dc = 27;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _panel_instance->config();
cfg.pin_cs = 5;
cfg.pin_rst = -1;
cfg.pin_busy = -1;
cfg.memory_width = 320;
cfg.memory_height = 480;
cfg.panel_width = 320;
cfg.panel_height = 480;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = 0;
cfg.dummy_read_pixel = 8;
cfg.dummy_read_bits = 1;
cfg.readable = true;
cfg.invert = false;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = true;
_panel_instance->config(cfg);
}elif defined(M5STACKLGFX)
using namespace m5stack;
auto _panel_instance = new Panel_M5StackCore2();
auto _bus_instance = new lgfx::Bus_SPI();
// auto _touch_instance = new lgfx::Touch_FT5x06();
auto _touch_instance = new Touch_M5Tough();
// AXP192_LDO2 = LCD PWR
// AXP192_IO4 = LCD RST
// AXP192_DC3 = LCD BL (Core2)
// AXP192_LDO3 = LCD BL (Tough)
// AXP192_IO1 = TP RST (Tough)
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x28, 0xF0, ~0, axp_i2c_freq); // set LDO2 3300mv // LCD PWR
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x12, 0x04, ~0, axp_i2c_freq); // LDO2 enable
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x92, 0x00, 0xF8,
axp_i2c_freq); // GPIO1 OpenDrain (M5Tough TOUCH)
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x95, 0x84, 0x72, axp_i2c_freq); // GPIO4 enable
if(/*use_reset*/ true) {
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x96, 0, ~0x02, axp_i2c_freq); // GPIO4 LOW (LCD RST)
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x94, 0, ~0x02,
axp_i2c_freq); // GPIO1 LOW (M5Tough TOUCH RST)
lgfx::delay(1);
}
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x96, 0x02, ~0, axp_i2c_freq); // GPIO4 HIGH (LCD RST)
lgfx::i2c::writeRegister8(axp_i2c_port, axp_i2c_addr, 0x94, 0x02, ~0,
axp_i2c_freq); // GPIO1 HIGH (M5Tough TOUCH RST)
{
auto bus_cfg = _bus_instance->config();
bus_cfg.pin_mosi = GPIO_NUM_23;
bus_cfg.pin_miso = GPIO_NUM_38;
bus_cfg.pin_sclk = GPIO_NUM_18;
bus_cfg.pin_dc = GPIO_NUM_15;
bus_cfg.spi_3wire = false;
bus_cfg.freq_write = 40000000;
bus_cfg.freq_read = 16000000;
_bus_instance->config(bus_cfg);
_bus_instance->init();
}
_panel_instance->bus(_bus_instance);
{
auto cfg = _touch_instance->config();
cfg.pin_int = GPIO_NUM_39; // INT pin number
cfg.pin_sda = GPIO_NUM_21; // I2C SDA pin number
cfg.pin_scl = GPIO_NUM_22; // I2C SCL pin number
cfg.i2c_addr = I2C_TOUCH_ADDRESS; // I2C device addr
cfg.i2c_port = I2C_NUM_1; // I2C port number
cfg.freq = 400000; // I2C freq
cfg.x_min = 0;
cfg.x_max = 319;
cfg.y_min = 0;
cfg.y_max = 239;
cfg.bus_shared = false;
_touch_instance->config(cfg);
}
_panel_instance->touch(_touch_instance);
// float affine[6] = {1, 0, 0, 0, 1, 0};
//_panel_instance->setCalibrateAffine(affine);
//_panel_instance->setLight(new Light_M5StackCore2());
_panel_instance->setLight(new Light_M5Tough());elif defined(ESP32_2432S028R)
auto _panel_instance = new lgfx::Panel_ILI9341();
auto _bus_instance = new lgfx::Bus_SPI();
auto _touch_instance = new lgfx::Touch_XPT2046();
{
auto cfg = _bus_instance->config();
cfg.spi_host = SPI2_HOST;
cfg.spi_mode = 0;
cfg.freq_write = SPI_FREQUENCY;
cfg.freq_read = SPI_READ_FREQUENCY;
cfg.spi_3wire = false;
cfg.use_lock = true;
cfg.dma_channel = 1;
cfg.pin_sclk = TFT_SCLK;
cfg.pin_mosi = TFT_MOSI;
cfg.pin_miso = TFT_MISO;
cfg.pin_dc = TFT_DC;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _panel_instance->config();
cfg.pin_cs = TFT_CS;
cfg.pin_rst = TFT_RST;
cfg.pin_busy = TFT_BUSY;
cfg.memory_width = TFT_WIDTH;
cfg.memory_height = TFT_HEIGHT;
cfg.panel_width = TFT_WIDTH;
cfg.panel_height = TFT_HEIGHT;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = TFT_ROTATION;
cfg.dummy_read_pixel = 8;
cfg.dummy_read_bits = 1;
cfg.readable = true;
cfg.invert = false;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = false;
_panel_instance->config(cfg);
}
{
auto cfg = _touch_instance->config();
cfg.x_min = 0;
cfg.x_max = 4095;
cfg.y_min = 4095;
cfg.y_max = 0;
cfg.pin_int = TOUCH_IRQ;
cfg.bus_shared = false;
cfg.offset_rotation = TOUCH_OFFSET_ROTATION;
cfg.spi_host = VSPI_HOST;
cfg.freq = SPI_TOUCH_FREQUENCY;
cfg.pin_sclk = TOUCH_SCLK;
cfg.pin_mosi = TOUCH_MOSI;
cfg.pin_miso = TOUCH_MISO;
cfg.pin_cs = TOUCH_CS;
_touch_instance->config(cfg);
_panel_instance->setTouch(_touch_instance);
}elif defined(TTGO_T_HMI)
pinMode(PWR_EN, OUTPUT);
digitalWrite(PWR_EN, HIGH);
auto _panel_instance = new lgfx::Panel_ST7789();
auto _bus_instance = new lgfx::Bus_Parallel8();
auto _touch_instance = new lgfx::Touch_XPT2046();
{
auto cfg = _bus_instance->config();
cfg.freq_write = 16000000;
cfg.pin_wr = TFT_WR;
cfg.pin_rd = TFT_RD;
cfg.pin_rs = TFT_DC; // D/C
cfg.pin_d0 = TFT_D0;
cfg.pin_d1 = TFT_D1;
cfg.pin_d2 = TFT_D2;
cfg.pin_d3 = TFT_D3;
cfg.pin_d4 = TFT_D4;
cfg.pin_d5 = TFT_D5;
cfg.pin_d6 = TFT_D6;
cfg.pin_d7 = TFT_D7;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _panel_instance->config();
cfg.pin_cs = TFT_CS;
cfg.pin_rst = TFT_RST;
cfg.pin_busy = TFT_BUSY;
cfg.memory_width = TFT_WIDTH;
cfg.memory_height = TFT_HEIGHT;
cfg.panel_width = TFT_WIDTH;
cfg.panel_height = TFT_HEIGHT;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = TFT_ROTATION;
cfg.dummy_read_pixel = 8;
cfg.dummy_read_bits = 1;
cfg.readable = true;
cfg.invert = false;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = false;
_panel_instance->config(cfg);
}
{
auto cfg = _touch_instance->config();
cfg.x_min = 0;
cfg.x_max = 4095;
cfg.y_min = 4095;
cfg.y_max = 0;
cfg.pin_int = TOUCH_IRQ;
cfg.bus_shared = false;
cfg.offset_rotation = TOUCH_OFFSET_ROTATION;
cfg.spi_host = SPI3_HOST;
cfg.freq = SPI_TOUCH_FREQUENCY;
cfg.pin_sclk = TOUCH_SCLK;
cfg.pin_mosi = TOUCH_MOSI;
cfg.pin_miso = TOUCH_MISO;
cfg.pin_cs = TOUCH_CS;
_touch_instance->config(cfg);
_panel_instance->setTouch(_touch_instance);
}elif 0
auto _panel_instance = new lgfx::Panel_ST7796();
auto _bus_instance = new lgfx::Bus_SPI();
auto _touch_instance = new lgfx::Touch_FT5x06();
{
auto cfg = _bus_instance->config();
cfg.spi_host = VSPI_HOST;
cfg.spi_mode = 0;
cfg.freq_write = 40000000;
cfg.freq_read = 16000000;
cfg.spi_3wire = false;
cfg.use_lock = true;
cfg.dma_channel = 1;
cfg.pin_sclk = 18;
cfg.pin_mosi = 19;
cfg.pin_miso = 23;
cfg.pin_dc = 27;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _panel_instance->config();
cfg.pin_cs = 5;
cfg.pin_rst = -1;
cfg.pin_busy = -1;
cfg.memory_width = 320;
cfg.memory_height = 480;
cfg.panel_width = 320;
cfg.panel_height = 480;
cfg.offset_x = 0;
cfg.offset_y = 0;
cfg.offset_rotation = 0;
cfg.dummy_read_pixel = 8;
cfg.dummy_read_bits = 1;
cfg.readable = true;
cfg.invert = false;
cfg.rgb_order = false;
cfg.dlen_16bit = false;
cfg.bus_shared = true;
_panel_instance->config(cfg);
}elif defined(MKFBS_TFT_S3_40_RGB)
auto _panel_instance = new lgfx::Panel_RGB();
auto _bus_instance = new lgfx::Bus_RGB();
auto _touch_instance = new lgfx::Touch_GT911();elif defined(MKFBS_TFT_S3_43_RGB)
auto _panel_instance = new lgfx::Panel_RGB();
auto _bus_instance = new lgfx::Bus_RGB();
auto _touch_instance = new lgfx::Touch_GT911();
auto _light_instance = new lgfx::Light_PWM();
{
auto cfg = _panel_instance->config();
cfg.memory_width = TFT_WIDTH;
cfg.memory_height = TFT_HEIGHT;
cfg.panel_width = TFT_WIDTH;
cfg.panel_height = TFT_HEIGHT;
cfg.offset_x = 0;
cfg.offset_y = 0;
_panel_instance->config(cfg);
}
{
auto cfg = _panel_instance->config_detail();
cfg.use_psram = 1;
_panel_instance->config_detail(cfg);
}
{
auto cfg = _bus_instance->config();
cfg.panel = _panel_instance;
cfg.pin_d0 = GPIO_NUM_8; // B0
cfg.pin_d1 = GPIO_NUM_3; // B1
cfg.pin_d2 = GPIO_NUM_46; // B2
cfg.pin_d3 = GPIO_NUM_9; // B3
cfg.pin_d4 = GPIO_NUM_1; // B4
cfg.pin_d5 = GPIO_NUM_5; // G0
cfg.pin_d6 = GPIO_NUM_6; // G1
cfg.pin_d7 = GPIO_NUM_7; // G2
cfg.pin_d8 = GPIO_NUM_15; // G3
cfg.pin_d9 = GPIO_NUM_16; // G4
cfg.pin_d10 = GPIO_NUM_4; // G5
cfg.pin_d11 = GPIO_NUM_45; // R0
cfg.pin_d12 = GPIO_NUM_48; // R1
cfg.pin_d13 = GPIO_NUM_47; // R2
cfg.pin_d14 = GPIO_NUM_21; // R3
cfg.pin_d15 = GPIO_NUM_14; // R4
cfg.pin_henable = GPIO_NUM_40;
cfg.pin_vsync = GPIO_NUM_41;
cfg.pin_hsync = GPIO_NUM_39;
cfg.pin_pclk = GPIO_NUM_42;
cfg.freq_write = 14000000;
cfg.hsync_polarity = 0;
cfg.hsync_front_porch = 8;
cfg.hsync_pulse_width = 4;
cfg.hsync_back_porch = 16;
cfg.vsync_polarity = 0;
cfg.vsync_front_porch = 4;
cfg.vsync_pulse_width = 4;
cfg.vsync_back_porch = 4;
cfg.pclk_idle_high = 1;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _touch_instance->config();
cfg.x_min = 0;
cfg.y_min = 0;
cfg.bus_shared = false;
cfg.offset_rotation = 0;
// I2C接続
cfg.i2c_port = I2C_NUM_1;
cfg.pin_sda = GPIO_NUM_17;
cfg.pin_scl = GPIO_NUM_18;
cfg.freq = 400000;
// for Board v1.3
cfg.pin_int = GPIO_NUM_NC;
cfg.pin_rst = GPIO_NUM_38;
cfg.x_max = 800;
cfg.y_max = 480;
_touch_instance->config(cfg);
_panel_instance->setTouch(_touch_instance);
}
{
auto cfg = _light_instance->config();
cfg.pin_bl = GPIO_NUM_2;
_light_instance->config(cfg);
_panel_instance->setLight(_light_instance);
}elif defined(ESP32_8040S070C) || defined(RGB_DRIVER)
auto _panel_instance = new lgfx::Panel_RGB();
auto _bus_instance = new lgfx::Bus_RGB();
auto _touch_instance = new lgfx::Touch_GT911();
{
auto cfg = _panel_instance->config();
cfg.memory_width = TFT_WIDTH;
cfg.memory_height = TFT_HEIGHT;
cfg.panel_width = TFT_WIDTH;
cfg.panel_height = TFT_HEIGHT;
cfg.offset_x = 0;
cfg.offset_y = 0;
_panel_instance->config(cfg);
}
{
auto cfg = _panel_instance->config_detail();
cfg.use_psram = 1;
_panel_instance->config_detail(cfg);
}
{
auto cfg = _bus_instance->config();
cfg.panel = _panel_instance;
cfg.pin_d0 = TFT_B0; // B0
cfg.pin_d1 = TFT_B1; // B1
cfg.pin_d2 = TFT_B2; // B2
cfg.pin_d3 = TFT_B3; // B3
cfg.pin_d4 = TFT_B4; // B4
cfg.pin_d5 = TFT_G0; // G0
cfg.pin_d6 = TFT_G1; // G1
cfg.pin_d7 = TFT_G2; // G2
cfg.pin_d8 = TFT_G3; // G3
cfg.pin_d9 = TFT_G4; // G4
cfg.pin_d10 = TFT_G5; // G5
cfg.pin_d11 = TFT_R0; // R0
cfg.pin_d12 = TFT_R1; // R1
cfg.pin_d13 = TFT_R2; // R2
cfg.pin_d14 = TFT_R3; // R3
cfg.pin_d15 = TFT_R4; // R4
cfg.pin_henable = TFT_DE;
cfg.pin_vsync = TFT_VSYNC;
cfg.pin_hsync = TFT_HSYNC;
cfg.pin_pclk = TFT_PCLK;
cfg.freq_write = TFT_PREFER_SPEED;
cfg.hsync_polarity = TFT_HSYNC_POLARITY;
cfg.hsync_front_porch = TFT_HSYNC_FRONT_PORCH;
cfg.hsync_pulse_width = TFT_HSYNC_PULSE_WIDTH;
cfg.hsync_back_porch = TFT_HSYNC_BACK_PORCH;
cfg.vsync_polarity = TFT_VSYNC_POLARITY;
cfg.vsync_front_porch = TFT_VSYNC_FRONT_PORCH;
cfg.vsync_pulse_width = TFT_VSYNC_PULSE_WIDTH;
cfg.vsync_back_porch = TFT_VSYNC_BACK_PORCH;
cfg.pclk_idle_high = 1;
_bus_instance->config(cfg);
_panel_instance->setBus(_bus_instance);
}
{
auto cfg = _touch_instance->config();
cfg.x_min = 0;
cfg.x_max = TFT_WIDTH;
cfg.y_min = 0;
cfg.y_max = TFT_HEIGHT;
cfg.pin_int = TOUCH_IRQ;
cfg.bus_shared = false;
cfg.offset_rotation = TOUCH_OFFSET_ROTATION;
cfg.i2c_port = I2C_TOUCH_PORT;
cfg.pin_sda = TOUCH_SDA;
cfg.pin_scl = TOUCH_SCL;
cfg.freq = 400000;
cfg.i2c_addr = 0x14; // 0x5D , 0x14
_touch_instance->config(cfg);
_panel_instance->setTouch(_touch_instance);
}else
Preferences preferences;
nvs_user_begin(preferences, "tft", false);
this->tft_driver = preferences.getUInt("DRIVER", get_tft_driver());
lgfx::IBus* _bus_instance = _init_bus(&preferences);
lgfx::Panel_Device* _panel_instance = _init_panel(_bus_instance);
lgfx::ITouch* _touch_instance = _init_touch(&preferences);
if(_panel_instance != nullptr) {
_panel_instance->setBus(_bus_instance);
configure_panel(_panel_instance, &preferences);
_panel_instance->setTouch(_touch_instance);
}
preferences.end();endif
tft.setPanel(_panel_instance);
if(_touch_instance != nullptr) {
LOG_INFO(TAG_TFT, F("Touch " D_SERVICE_STARTED));
} else {
LOG_WARNING(TAG_TFT, F("Touch " D_SERVICE_START_FAILED));
}
/* TFT init */
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
tft.begin();
LOG_DEBUG(TAG_TFT, F("%s - %d"), __FILE__, __LINE__);
tft.setSwapBytes(true); /* set endianness */
LOG_INFO(TAG_TFT, F(D_SERVICE_STARTED));}
void LovyanGfx::show_info() { splashscreen();
LOG_VERBOSE(TAG_TFT, F("LovyanGFX : v%d.%d.%d"), LGFX_VERSION_MAJOR, LGFX_VERSION_MINOR, LGFX_VERSION_PATCH);
auto panel = tft.getPanel();
if(!panel) return;
if(!panel->getBus()) return;
lgfx::v1::bus_type_t bus_type = panel->getBus()->busType();
if(bus_type == lgfx::v1::bus_parallel8) {
LOG_VERBOSE(TAG_TFT, F("Interface : Parallel 8bit"));
auto bus = (lgfx::Bus_Parallel8*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
tftPinInfo(F("TFT_WR"), cfg.pin_wr);
tftPinInfo(F("TFT_RD"), cfg.pin_rd);
tftPinInfo(F("TFT_RS"), cfg.pin_rs);
tftPinInfo(F("TFT_D0"), cfg.pin_d0);
tftPinInfo(F("TFT_D1"), cfg.pin_d1);
tftPinInfo(F("TFT_D2"), cfg.pin_d2);
tftPinInfo(F("TFT_D3"), cfg.pin_d3);
tftPinInfo(F("TFT_D4"), cfg.pin_d4);
tftPinInfo(F("TFT_D5"), cfg.pin_d5);
tftPinInfo(F("TFT_D6"), cfg.pin_d6);
tftPinInfo(F("TFT_D7"), cfg.pin_d7);
}if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
if(bus_type == lgfx::v1::bus_parallel16) {
LOG_VERBOSE(TAG_TFT, F("Interface : Parallel 16bit"));
auto bus = (lgfx::v1::Bus_Parallel16*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
tftPinInfo(F("TFT_WR"), cfg.pin_wr);
tftPinInfo(F("TFT_RD"), cfg.pin_rd);
tftPinInfo(F("TFT_RS"), cfg.pin_rs);
tftPinInfo(F("TFT_D0"), cfg.pin_d0);
tftPinInfo(F("TFT_D1"), cfg.pin_d1);
tftPinInfo(F("TFT_D2"), cfg.pin_d2);
tftPinInfo(F("TFT_D3"), cfg.pin_d3);
tftPinInfo(F("TFT_D4"), cfg.pin_d4);
tftPinInfo(F("TFT_D5"), cfg.pin_d5);
tftPinInfo(F("TFT_D6"), cfg.pin_d6);
tftPinInfo(F("TFT_D7"), cfg.pin_d7);
tftPinInfo(F("TFT_D8"), cfg.pin_d8);
tftPinInfo(F("TFT_D9"), cfg.pin_d9);
tftPinInfo(F("TFT_D01"), cfg.pin_d10);
tftPinInfo(F("TFT_D11"), cfg.pin_d11);
tftPinInfo(F("TFT_D12"), cfg.pin_d12);
tftPinInfo(F("TFT_D13"), cfg.pin_d13);
tftPinInfo(F("TFT_D14"), cfg.pin_d14);
tftPinInfo(F("TFT_D15"), cfg.pin_d15);
}endif
if(bus_type == lgfx::v1::bus_spi) {
LOG_VERBOSE(TAG_TFT, F("Interface : Serial"));
auto bus = (lgfx::Bus_SPI*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
tftPinInfo(F("TFT_MOSI"), cfg.pin_mosi);
tftPinInfo(F("TFT_MISO"), cfg.pin_miso);
tftPinInfo(F("TFT_SCLK"), cfg.pin_sclk);
tftPinInfo(F("TFT_DC"), cfg.pin_dc);
}
{
auto cfg = panel->config(); // Get the structure for panel configuration.
tftPinInfo(F("TFT_CS"), cfg.pin_cs);
tftPinInfo(F("TFT_RST"), cfg.pin_rst);
tftPinInfo(F("TFT_BUSY"), cfg.pin_busy);
}
if(bus_type == lgfx::v1::bus_spi) {
auto bus = (lgfx::Bus_SPI*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
uint32_t freq = cfg.freq_write / 100000;
LOG_VERBOSE(TAG_TFT, F("TFT SPI freq: %d.%d MHz"), freq / 10, freq % 10);
}
lgfx::v1::ITouch* touch = panel->getTouch();
if(touch) {
auto cfg = touch->config(); // Get the structure for bus configuration.
uint32_t freq = cfg.freq / 100000;
tftPinInfo(F("TOUCH_INT"), cfg.pin_int);
tftPinInfo(F("TOUCH_RST"), cfg.pin_rst);
if(touch->isSPI()) {
tftPinInfo(F("TOUCH_MISO"), cfg.pin_miso);
tftPinInfo(F("TOUCH_MOSI"), cfg.pin_mosi);
tftPinInfo(F("TOUCH_SCLK"), cfg.pin_sclk);
tftPinInfo(F("TOUCH_CS"), cfg.pin_cs);
LOG_VERBOSE(TAG_TFT, F("Touch SPI freq. : %d.%d MHz"), freq / 10, freq % 10);
} else {
tftPinInfo(F("TOUCH_SDA"), cfg.pin_sda);
tftPinInfo(F("TOUCH_SCL"), cfg.pin_scl);
tftPinInfo(F("TOUCH_ADDR"), cfg.i2c_addr);
LOG_VERBOSE(TAG_TFT, F("Touch I2C freq. : %d.%d MHz"), freq / 10, freq % 10);
}
}}
void LovyanGfx::splashscreen() { uint8_t fg[] = logoFgColor; uint8_t bg[] = logoBgColor; lv_color_t fgColor = lv_color_make(fg[0], fg[1], fg[2]); lv_color_t bgColor = lv_color_make(bg[0], bg[1], bg[2]);
tft.fillScreen(bgColor.full);
int x = (tft.width() - logoWidth) / 2;
int y = (tft.height() - logoHeight) / 2;
tft.drawXBitmap(x, y, logoImage, logoWidth, logoHeight, fgColor.full);
// tft.fillSmoothRoundRect(x, y, logoWidth, logoWidth, 15, fgColor.full);}
void LovyanGfx::set_rotation(uint8_t rotation) { LOG_VERBOSE(TAG_TFT, F("Rotation : %d"), rotation); tft.setRotation(rotation); }
void LovyanGfx::set_invert(bool invert) { char buffer[4]; memcpy_P(buffer, invert ? PSTR(D_YES) : PSTR(D_NO), sizeof(buffer));
LOG_VERBOSE(TAG_TFT, F("Invert Color: %s"), buffer);
tft.invertDisplay(invert);}
/ Update TFT / void IRAM_ATTR LovyanGfx::flush_pixels(lv_disp_drv_t disp, const lv_area_t area, lv_color_t color_p) { uint32_t w = (area->x2 - area->x1 + 1); uint32_t h = (area->y2 - area->y1 + 1); uint32_t len = w h;
tft.startWrite(); /* Start new TFT transaction */
tft.setAddrWindow(area->x1, area->y1, w, h); /* set the working window */
tft.writePixels((lgfx::rgb565_t*)&color_p->full, w * h); /* Write words at once */
tft.endWrite(); /* terminate TFT transaction */
/* Tell lvgl that flushing is done */
lv_disp_flush_ready(disp);}
bool LovyanGfx::is_driver_pin(uint8_t pin) { auto panel = tft.getPanel(); if(panel && panel->getBus()) { lgfx::v1::bus_type_t bus_type = panel->getBus()->busType();
if(bus_type == lgfx::v1::bus_parallel8) {
auto bus = (lgfx::Bus_Parallel8*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
if(pin == cfg.pin_wr || pin == cfg.pin_rd || pin == cfg.pin_rs || pin == cfg.pin_d0 || pin == cfg.pin_d1 ||
pin == cfg.pin_d2 || pin == cfg.pin_d3 || pin == cfg.pin_d4 || pin == cfg.pin_d5 || pin == cfg.pin_d6 ||
pin == cfg.pin_d7)
return true;if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
} else if(bus_type == lgfx::v1::bus_parallel16) {
auto bus = (lgfx::v1::Bus_Parallel16*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
if(cfg.pin_wr || pin == cfg.pin_rd || pin == cfg.pin_rs || pin == cfg.pin_d0 || pin == cfg.pin_d1 ||
pin == cfg.pin_d2 || pin == cfg.pin_d3 || pin == cfg.pin_d4 || pin == cfg.pin_d5 || pin == cfg.pin_d6 ||
pin == cfg.pin_d7 || pin == cfg.pin_d8 || pin == cfg.pin_d9 || pin == cfg.pin_d10 ||
pin == cfg.pin_d11 || pin == cfg.pin_d12 || pin == cfg.pin_d13 || pin == cfg.pin_d14 ||
pin == cfg.pin_d15)
return true;endif
} else if(bus_type == lgfx::v1::bus_spi) {
auto bus = (lgfx::Bus_SPI*)panel->getBus();
auto cfg = bus->config(); // Get the structure for bus configuration.
if(pin == cfg.pin_mosi || pin == cfg.pin_miso || pin == cfg.pin_sclk || pin == cfg.pin_dc) return true;
}
{
auto cfg = panel->config(); // Get the structure for panel configuration.
if(pin == cfg.pin_cs || pin == cfg.pin_rst || pin == cfg.pin_busy) return true;
}
lgfx::v1::ITouch* touch = panel->getTouch();
if(touch) {
auto cfg = touch->config(); // Get the structure for bus configuration.
if(pin == cfg.pin_int || pin == cfg.pin_rst) return true;
if(touch->isSPI()) {
if(pin == cfg.pin_miso || pin == cfg.pin_mosi || pin == cfg.pin_sclk || pin == cfg.pin_cs) return true;
} else {
if(pin == cfg.pin_sda || pin == cfg.pin_scl) return true;
}
}
}
return false;}
const char* LovyanGfx::get_tft_model() {
if defined(ILI9341_DRIVER)
return "ILI9341";elif defined(ILI9342_DRIVER)
return "ILI9342";elif defined(ST7735_DRIVER)
return "ST7735";elif defined(ILI9163_DRIVER)
return "ILI9163";elif defined(S6D02A1_DRIVER)
return "S6D02A1";elif defined(ST7796_DRIVER)
return "ST7796";elif defined(ILI9486_DRIVER)
return "ILI9486";elif defined(ILI9481_DRIVER)
return "ILI9481";elif defined(ILI9488_DRIVER)
return "ILI9488";elif defined(HX8357D_DRIVER)
return "HX8357D";elif defined(EPD_DRIVER)
return "EPD";elif defined(ST7789_DRIVER)
return "ST7789";elif defined(R61581_DRIVER)
return "R61581";elif defined(ST7789_2_DRIVER)
return "ST7789_2";elif defined(R61529_DRIVER)
return "R61529";elif defined(RM68140_DRIVER)
return "RM68140";else
return "Other";endif
}
uint32_t LovyanGfx::get_tft_driver() {
if defined(ILI9341_DRIVER)
return TFT_PANEL_ILI9341;elif defined(ILI9342_DRIVER)
return TFT_PANEL_ILI9342;elif defined(ILI9163_DRIVER)
return TFT_PANEL_ILI9163;elif defined(ILI9486_DRIVER)
return TFT_PANEL_ILI9486;elif defined(ILI9481_DRIVER)
return TFT_PANEL_ILI9481;elif defined(ILI9488_DRIVER)
return TFT_PANEL_ILI9488;elif defined(HX8357D_DRIVER)
return TFT_PANEL_HX8357D;elif defined(ST7735_DRIVER)
return TFT_PANEL_ST7735;elif defined(ST7789_DRIVER)
return TFT_PANEL_ST7789;elif defined(ST7789_2_DRIVER)
return TFT_PANEL_ST7789B;elif defined(ST7796_DRIVER)
return TFT_PANEL_ST7796;elif defined(S6D02A1_DRIVER)
return TFT_PANEL_S6D02A1;elif defined(R61581_DRIVER)
return TFT_PANEL_R61581;elif defined(R61529_DRIVER)
return TFT_PANEL_R61529;elif defined(RM68140_DRIVER)
return TFT_PANEL_RM68140;elif defined(EPD_DRIVER)
return TFT_PANEL_EPD;elif defined(RGB_DRIVER)
return TFT_PANEL_RGB;else
return TFT_PANEL_UNKNOWN;endif
}
uint32_t LovyanGfx::get_touch_driver() {
ifdef TOUCH_DRIVER
return TOUCH_DRIVER > 0 ? TOUCH_DRIVER : 0;else
return 0;endif
}
} // namespace dev
dev::LovyanGfx haspTft;
endif`
End of story. my touch works now!
fvanroie
tinloaf
Is your feature request related to a problem? Please describe. ESP32-2432s024c has ILI9341 TFT and CST820 capacitive touch screen.
Describe the solution you'd like Need support for CST820 Capacitive Touchscreen used in ESP32-2432s024c boards
Describe alternatives you've considered ESP32-2432s024 boards has two variations r - with resistive and c - with capacitive touchscreen. Both would be handy to have in openHASP
Additional context I tried to integrate arduino libraries into openHASP - master, but couldn't understand the principle of .pıo file generation, would be good if developers would write detailed instructions on how to integrate any arduino library into openHASP along with CST820 capacitive touch support.