Issue with towbar FG 2020.4

HHS81 / c182s

Cessna C182S (1996 model) for FlightGear

GNU General Public License v2.0

26 stars 9 forks source link

Issue with towbar FG 2020.4 #560

Closed jakkos98 closed 5 months ago

jakkos98 commented 5 months ago

After selecting towbar clickspot for nose wheel chock is no longer working. Both disabling of towbar and puting wheel chock can be done later only via menu dialogs.

Best regards Jakub Kosakowski

hbeni commented 5 months ago

Could not reproduce here, working in all combinations and with many repetitions.

The condition to have the clickspot is that the plane is not moving. So as long as it is moving, it is expected to not show the clickspot.

What exact plane version did you use?

The latest release from FGAddon,
or the github one here?
And what variant? (the T or the S?)

Where did you try it and what weather did you have?

hbeni commented 5 months ago

Or am I misunderstanding the issue? Since the towbar addition, the nose wheel clickspot was transferred to a menu, because there is more than one option now. This will also happen to the main wheels some time ahead, when wear and tear is going to be modelled.

TheFGFSEagle commented 5 months ago

Will check that out as well when I test the prop shadows.

hbeni commented 5 months ago

Thanks Eagle! I could not reproduce it, and maybe it is just a misunderstanding on my side; I think we need feedback from @jakkos98

jakkos98 commented 5 months ago

Looks like issue was only on FG nightly from 24.01.2024 (or earlier) and on FG nightly from 25.01.2024 everything is working as it should. (C182S from FGAddon)

hbeni commented 5 months ago

Thx for the Feedback!

TheFGFSEagle commented 5 months ago

I tested with a relatively old FG build (perhaps 1-2 months old), and the clickspot at the nose gear wasn't working at all.