Problem with some jpeg - decoder returned 0x10

[iszczyg]

Hi, I've just installed omxiv on RP4. It works perfectly, it is very fast and light. I really like it. But I have noticed that it can't show some jpgs and reports "decoder returned 0x10". These jpgs come from Samsung Galaxy S9. If I transcode the jpeg with jpegtran omxiv is able to show the picture. How to correct this problem?

Best regards Irek, Poland

[Ruffio]

Can you provide some images that fails as described above? Without concrete test data this will be impossible to persue...

[Ruffio]

@HaarigerHarald This issue should be closed due to lack of response from originator in two months

[mLojowski]

Hi. I would like to reopen the issue as I've seen the same behavior with omxiv. Was this solve before or we can reopen the issue? I've got some pictures that return "decoder returned 0x10" notyfication, and I'm able to share some image with it. Regards, Marcin

[FlapTrap99]

Hi, I'm also having this issue. Two jpg's of the same scene, one decodes OK but the other returns 0x10. Forcing software decode solves the problem i.e. omxiv -s decode_error.jpg works OK.

Hardware info:

pi@raspberrypi:~ $ cat /proc/cpuinfo
processor       : 0
model name      : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS        : 697.95
Features        : half thumb fastmult vfp edsp java tls
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xb76
CPU revision    : 7

Hardware        : BCM2835
Revision        : 9000c1
Serial          : 000000003c016635
Model           : Raspberry Pi Zero W Rev 1.1
pi@raspberrypi:~ $

.