Open wzzhanghong opened 1 month ago
具体要看 你的硬件设计和原厂的硬件设计区别大不大
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年05月28日 00:54 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Subscribed @.***> | | 主题 | [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018的设备可以直接替换你的这个固件吗?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全? 另外如果我要在qwrt上安装openwrt的其他插件,一定要重新编译吗?
32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
我觉得是可以的
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 23:53 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
有ipk 是可以安装的 不过,我都是下载ipk源码包,整合到sdk里。 你可以尝试一下。
--
Best regards
quanhai zhang
在 2024-06-16 22:53:32,"wzzhanghong" @.***> 写道:
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
好的,谢谢你的建议,我去尝试一下。冒昧问一下,可否分享一下你的qsdk 包?在 2024年6月18日,14:42,Hans @.***> 写道: 有ipk 是可以安装的 不过,我都是下载ipk源码包,整合到sdk里。 你可以尝试一下。
--
Best regards
quanhai zhang
在 2024-06-16 22:53:32,"wzzhanghong" @.***> 写道:
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
这个资源需要付费
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月18日 21:56 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
好的,谢谢你的建议,我去尝试一下。冒昧问一下,可否分享一下你的qsdk 包?在 2024年6月18日,14:42,Hans @.***> 写道: 有ipk 是可以安装的 不过,我都是下载ipk源码包,整合到sdk里。 你可以尝试一下。
--
Best regards
quanhai zhang
在 2024-06-16 22:53:32,"wzzhanghong" @.***> 写道:
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
什么价格?在 2024年6月19日,09:46,Hans @.***> 写道: 这个资源需要付费
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月18日 21:56 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
好的,谢谢你的建议,我去尝试一下。冒昧问一下,可否分享一下你的qsdk 包?在 2024年6月18日,14:42,Hans @.***> 写道: 有ipk 是可以安装的 不过,我都是下载ipk源码包,整合到sdk里。 你可以尝试一下。
--
Best regards
quanhai zhang
在 2024-06-16 22:53:32,"wzzhanghong" @.***> 写道:
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
加我qq吧86174397
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月19日 12:56 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
什么价格?在 2024年6月19日,09:46,Hans @.***> 写道: 这个资源需要付费
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月18日 21:56 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
好的,谢谢你的建议,我去尝试一下。冒昧问一下,可否分享一下你的qsdk 包?在 2024年6月18日,14:42,Hans @.***> 写道: 有ipk 是可以安装的 不过,我都是下载ipk源码包,整合到sdk里。 你可以尝试一下。
--
Best regards
quanhai zhang
在 2024-06-16 22:53:32,"wzzhanghong" @.***> 写道:
谢谢你的回复!那是否qsdk编译的openwrt都可以用你的app img来更新吗?我在我的这个设备的uboot上执行nand dump没有任何反应,不知道是怎么回事。我找到的qsdk 从来没编译成功过,是下载的包有问题吗?如果要安装openwrt 的插件,是否一定要重新编译才可以?在 2024年6月16日,14:15,Hans @.***> 写道: 32bit 对于熟悉环境就够用了,uboot本身也是32bit,kernel 可以是64bit。 app image 在线升级的时候只包括kernel 和rootfs,不包括boot相关的。 nand dump 这些命令是有的,只是看不到help 信息
Best regards
quanhai zhang
---- 回复的原邮件 ---- | 发件人 | @.> | | 发送日期 | 2024年06月16日 00:28 | | 收件人 | Hanszhang2023/Qsdk_build_image @.> | | 抄送人 | Hans @.>, Comment @.> | | 主题 | Re: [Hanszhang2023/Qsdk_build_image] ipq5018的设备可以直接替换你的这个固件吗? (Issue #2) |
ipq5018为什么只有32bit? single和app分别代表什么意思?一个是系统,一个是uboot? 高通的uboot阉割很多命令,比如nand dump等,是否可以补全?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
ipq5018的设备可以直接替换你的这个固件吗?