Closed gtxaspec closed 2 years ago
Thanks, please keep doing this for new future releases and let me know when it's working or not.
works with latest RTSP firmware version: 4.28.4.49 as well
I ran into an issue where upgrading V2 to 4.9.6.232, it lost telnet. Attempting to remote install didn't work. I performed a factory reset back to 4.9.6.218 and attempted to install the hack using remote install, however it seems the file isn't being pushed to the camera even though is shows "Serving firmware file './firmware.bin' as http://
@HclX, 4.9.6.232 doesnt work with wyzehacks. Everything appears to work, except the wyze app reports no SD card, so no recording to SD. 😢
Starting telnetd...
10.xx.1.1:/mnt/xxx/NVR not mounted, try mounting to /mnt...
Mounting directory /mnt/WyzeCams/xxx/ as SD card
Mounting camera directory 10.xx.1.1:/mnt/xxx/NVR//mnt/WyzeCams/xxx/ on /media/mmcblk0p1
Not SD card, passing through...
Mounting camera directory 10.25.1.1:/mnt/xxx/NVR//mnt/WyzeCams/xxx/ on /media/mmc
Not SD card, passing through...
Notifying iCamera about SD card insertion event...
Sending: add@/devices/platform/jzmmc_v1.2.0/mmc_host/mmc0/mmc0:e624/block/mmcblk0/mmcblk0p1
Result: -1
I can confirm that this software works with my V3 camera version 4.36.0.228
Confirmed working on 4.9.6.241 v2
Confirming it works on V3 FW 4.36.25 :) thank you for the great work !!! Tested on 4 cams. My setup is 4 x Wyze V3 , NFS share on TrueNAS 12.0 U-4
Setting up the NFS share the right way took me a long time, as i was getting video files with 0 bytes. Problem was the ACL Mode on the Pool which was set to Restricted instead of Passthrough.
I can confirm WyzeHacks is working well on these firmware versions.
Working:
4.28.4.49 4.9.6.224
4.9.6.232