Closed SomebodySysop closed 3 years ago
OK, then let me ask it this way:
These instructions:
"First, use the SD card recovery method to install firmware 4.36.0.228 (you can find the image in tools/v3/firmwares), just like what you'd do with v2 cameras except that you need to name the firwmare demo_wcv3.bin on SD card."
If I already have the Wyze 4.36.0.228 firmware installed, do I still need to do this step?
If so, what is the "SD card recovery method"?
Thanks for any assistance!
"SD card recovery method" is the wyze official device recovery method, used to recovery a firmware if the device is bricked. It's used here to bring the camera to a known version of firmware before we start doing anything.
If I already have the Wyze 4.36.0.228 firmware installed, do I still need to do this step?
In that case you can skip that step.
On Wed, Feb 3, 2021, 23:05 SomebodySysop notifications@github.com wrote:
If I already have the Wyze 4.36.0.228 firmware installed, do I still need to do this step?
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/HclX/WyzeHacks/issues/76#issuecomment-773083559, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAZNWD7FMSG6EIRLHMRCZVLS5JBJZANCNFSM4XAMN7HA .
I have WyzeCam V3 camera with firmware 4.36.0.228 installed (installed using Wyze update).
The instructions here are for using remote_install.sh: https://github.com/HclX/WyzeHacks
The instructions here require installing firmware on sd card and running init_v3.sh: https://github.com/HclX/WyzeHacks/blob/master/tools/v3/README.md
Which instructions do I follow to install WyzeHacks?