HeRman-C / u8glib

Automatically exported from code.google.com/p/u8glib
Other
0 stars 0 forks source link

[u8glib v.1.4 - ATMEL version] Control a ST7920-based LCD using the USART in SPI mode #222

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
LCD controller ST7290, apart of having a kind of MODE 3 SPI - which is rare - 
has also a strange limitation on the CS control line which (apart of being 
active high, which is also rare) does not inhibit its internal shift register 
from latching data on the bus.
In case others SPI devices are connected to the same SPI bus, even controlling 
correctly the CS lane as u8glib is doing and avoiding conflicts, the controller 
catches everything is passing on the bus, ending up with some trash on the 
display.

This limitation prevents the usage of other SPI devices connected to the same 
bus and thus is limiting the flexibility of the system.

Micro-controllers in the ATMEL AtMEGA48/88/168/328 family have the capability 
of using the built-in USART in SPI mode (only for master mode).
This additional resource can be used to control a ST7920 LCD and free the main 
SPI module for other usages.

For this purpose, I developed a new u8g device that I called 
"u8g_dev_st7920_128x64_hw_usart_spi" and which is based on the existing 
"u8g_dev_st7920_128x64_hw_spi".
I added also the x4 versions.

I just added a new file ("u8g_com_atmega_st7920_hw_usart_spi.c"), modified 
"u8g_dev_st7920_128x64.c" and "u8g.h" to the original u8glib v1.14 package for 
atmel (not for ARDUINO).

Initialization is done using the standard u8glib way for HW SPI:
u8g_InitHWSPI(&u8g, &u8g_dev_st7920_128x64_4x_hw_usart_spi, PN(1, 1), 
U8G_PIN_NONE, U8G_PIN_NONE);

I'm sharing it with the community.
Oliver, please do a formal check if my code follows your library guidelines, 
coding style and philosophy.
I'm currently using it so it has been tested a lot on my application board, but 
it's worth to test it with another HW.

Hope it helps.

Nicola

PS: porting this device to Arduino should be very easy and trivial, but 
personally I won't do it as I don't use Arduino.

Original issue reported on code.google.com by Nicola.Z...@gmail.com on 28 Nov 2013 at 5:09

Attachments:

GoogleCodeExporter commented 8 years ago
thank you very much!

Original comment by olikr...@gmail.com on 28 Nov 2013 at 7:33