Dont read the data of Grove-multichannel

[OrlandoMoDo]

I tried to read the sensor gorve multichannel v2 and don't appear any of the data.

I put the code in a esp32 and works, but i put in the htcc-ab02 and dont read the data.

This is the code that I used:

include

include

GAS_GMXXX gas;

void setup() { Serial.begin(9600); gas.begin(Wire, 0x08); }

void loop() { uint8_t len = 0; uint8_t addr = 0; uint8_t i; uint32_t val = 0;

val = gas.measure_NO2(); Serial.print("NO2: "); Serial.print(val); Serial.print("  =  ");
Serial.print(gas.calcVol(val)); Serial.println("V");
val = gas.measure_C2H5OH(); Serial.print("C2H5OH: "); Serial.print(val); Serial.print("  =  ");
Serial.print(gas.calcVol(val)); Serial.println("V");
val = gas.measure_VOC(); Serial.print("VOC: "); Serial.print(val); Serial.print("  =  ");
Serial.print(gas.calcVol(val)); Serial.println("V");
val = gas.measure_CO(); Serial.print("CO: "); Serial.print(val); Serial.print("  =  ");
Serial.print(gas.calcVol(val)); Serial.println("V");

delay(2000);

}

[OrlandoMoDo]

ya lo pude solucionar, solo habia que reducir el request en la libreria