HelTecAutomation / CubeCell-Arduino

Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.
247 stars 138 forks source link

Region_US915 Frequencies #77

Closed csaleman closed 4 years ago

csaleman commented 4 years ago

LoRaWan Example on CubeCell Board and region Region_US915 seems to be using frequencies not listed here?

LoRaWAN US915 Class A start!

joining...TX on freq 909400000 Hz at DR 4 Event : Tx Done RX on freq 925700000 Hz at DR 13 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout TX on freq 902700000 Hz at DR 0 Event : Tx Done RX on freq 924500000 Hz at DR 10 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout join failed, join again at 30s later TX on freq 903000000 Hz at DR 4 Event : Tx Done RX on freq 923300000 Hz at DR 13 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout TX on freq 903100000 Hz at DR 0 Event : Tx Done RX on freq 925700000 Hz at DR 10 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout join failed, join again at 30s later TX on freq 909400000 Hz at DR 4 Event : Tx Done RX on freq 925700000 Hz at DR 13 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout TX on freq 903300000 Hz at DR 0 Event : Tx Done RX on freq 926300000 Hz at DR 10 Event : Rx Timeout RX on freq 923300000 Hz at DR 8 Event : Rx Timeout join failed, join again at 30s later TX on freq 914200000 Hz at DR 4

csaleman commented 4 years ago

Well I found this other link that explain frequency and band allocation a little better. So I'm closing this issue.