Unable to load Board manager V.0.0.6 in Arduino

sivaelid commented 4 years ago

Hi Just to report that the Board manager does not exist in Arduino Latest version shown is v0.0.5, even though on the Heltec Site.

Simon

Heltec-Aaron-Lee commented 4 years ago

Hi... I can see V0.06 in my board manager:

You may need delete the cache file in your Arduino15 folder and try again, it's in this path:

Or you can use this URL: https://github.com/HelTecAutomation/ASR650x-Arduino/releases/download/0.0.6/package_CubeCell_index.json

sivaelid commented 4 years ago

Hi thanks I will try again I was using Arduino 1.8.10 but did not delete cashe file as have not needed in the past.

Many thanks for the great work and looking forward to the new products

Simon

From: Aaron.Lee notifications@github.com Sent: 29 April 2020 09:36 To: HelTecAutomation/ASR650x-Arduino ASR650x-Arduino@noreply.github.com Cc: Si Simon@vaelid.com; Author author@noreply.github.com Subject: Re: [HelTecAutomation/ASR650x-Arduino] Unable to load Board manager V.0.0.6 in Arduino (#86)

Hi... I can see V0.06 in my board manager: https://user-images.githubusercontent.com/32860565/80576139-42657080-8a37-11ea-894b-18b671a23f50.png

You may need delete the cache file in your Arduino15 folder and try again, it's in this path: https://user-images.githubusercontent.com/32860565/80576194-58733100-8a37-11ea-9506-357f4771c5f4.png

Or you can use this URL: https://github.com/HelTecAutomation/ASR650x-Arduino/releases/download/0.0.6/package_CubeCell_index.json

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/HelTecAutomation/ASR650x-Arduino/issues/86#issuecomment-621065960 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AHWHUJNC7KPXP4YRUHVIDP3RO7RGDANCNFSM4MR5RH2Q . https://github.com/notifications/beacon/AHWHUJP6EP3Z3O564WYNOZDRO7RGDA5CNFSM4MR5RH22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEUCLN2A.gif

sivaelid commented 4 years ago

Hi I have just carried that out, and when loaded a new version I still only get to see version up to V0.0.5 as below, not version V0.0.6

Simon

From: Aaron.Lee notifications@github.com Sent: 29 April 2020 09:36 To: HelTecAutomation/ASR650x-Arduino ASR650x-Arduino@noreply.github.com Cc: Si Simon@vaelid.com; Author author@noreply.github.com Subject: Re: [HelTecAutomation/ASR650x-Arduino] Unable to load Board manager V.0.0.6 in Arduino (#86)

Hi... I can see V0.06 in my board manager: https://user-images.githubusercontent.com/32860565/80576139-42657080-8a37-11ea-894b-18b671a23f50.png

You may need delete the cache file in your Arduino15 folder and try again, it's in this path: https://user-images.githubusercontent.com/32860565/80576194-58733100-8a37-11ea-9506-357f4771c5f4.png

Or you can use this URL: https://github.com/HelTecAutomation/ASR650x-Arduino/releases/download/0.0.6/package_CubeCell_index.json

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/HelTecAutomation/ASR650x-Arduino/issues/86#issuecomment-621065960 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AHWHUJNC7KPXP4YRUHVIDP3RO7RGDANCNFSM4MR5RH2Q . https://github.com/notifications/beacon/AHWHUJP6EP3Z3O564WYNOZDRO7RGDA5CNFSM4MR5RH22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEUCLN2A.gif

Heltec-Aaron-Lee commented 4 years ago

Did you delete the V0.0.5 package, and also deleted the cache file in Arduino15 folder?

sivaelid commented 4 years ago

Hi yes and I tried a different version as well just now with Arduino Version 1.8.12. I will try a again with a totally clean machine

simon

From: Aaron.Lee notifications@github.com Sent: 29 April 2020 10:33 To: HelTecAutomation/ASR650x-Arduino ASR650x-Arduino@noreply.github.com Cc: Si Simon@vaelid.com; Author author@noreply.github.com Subject: Re: [HelTecAutomation/ASR650x-Arduino] Unable to load Board manager V.0.0.6 in Arduino (#86)

Did you delete the V0.0.5 package, and also deleted the cache file in Arduino15 folder?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/HelTecAutomation/ASR650x-Arduino/issues/86#issuecomment-621092723 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AHWHUJJDGZK7YWHV3PHEJZDRO7X6BANCNFSM4MR5RH2Q . https://github.com/notifications/beacon/AHWHUJL32AVOQ6XHOH4BSSTRO7X6BA5CNFSM4MR5RH22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEUCR64Y.gif

sivaelid commented 4 years ago

HI Arron Please not I have had to do the following.

I was using Board http://119.23.153.38/download/package_CubeCell_index.json which was previously on your site and this worked to Version V0.0.5
I had the Board manager in Arduino / Hardware as well to use the latest from GitHub.
After a clean install to Arduino 1.8.12 and using below It now work thanks. http://resource.heltec.cn/download/package_CubeCell_index.json

Simon

From: Aaron.Lee notifications@github.com Sent: 29 April 2020 10:33 To: HelTecAutomation/ASR650x-Arduino ASR650x-Arduino@noreply.github.com Cc: Si Simon@vaelid.com; Author author@noreply.github.com Subject: Re: [HelTecAutomation/ASR650x-Arduino] Unable to load Board manager V.0.0.6 in Arduino (#86)

Did you delete the V0.0.5 package, and also deleted the cache file in Arduino15 folder?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/HelTecAutomation/ASR650x-Arduino/issues/86#issuecomment-621092723 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AHWHUJJDGZK7YWHV3PHEJZDRO7X6BANCNFSM4MR5RH2Q . https://github.com/notifications/beacon/AHWHUJL32AVOQ6XHOH4BSSTRO7X6BA5CNFSM4MR5RH22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEUCR64Y.gif

Heltec-Aaron-Lee commented 4 years ago

the url resource.heltec.cn is pointed to119.23.153.38, indeed that's the same address. It should work. when I look into the json file, I can see the V0.0.6 pakcage.

sivaelid commented 4 years ago

H Arron I just used the new board manager and giving a lot of errors related to channel mask. Here they are for info:

WARNING: library LoRa claims to run on ASR650x-Arduino architecture(s) and may be incompatible with your current board which runs on CubeCell architecture(s).

WARNING: library Sensor_ThirdParty claims to run on ASR650x-Arduino architecture(s) and may be incompatible with your current board which runs on CubeCell architecture(s).

libraries\LoRa\LoRaWan_APP.cpp.o: In function `lwan_dev_params_update':

C:\Users\User\AppData\Local\Arduino15\packages\CubeCell\hardware\CubeCell\0.0.6\libraries\LoRa\src/LoRaWan_APP.cpp:436: undefined reference to `userChannelsMask'

C:\Users\User\AppData\Local\Arduino15\packages\CubeCell\hardware\CubeCell\0.0.6/cores/asr650x/projects/CubeCellLib.a(AT_Command.o): In function `getDevParam':

D:\lib/AT_Command.c:1241: undefined reference to `userChannelsMask'

C:\Users\User\AppData\Local\Arduino15\packages\CubeCell\hardware\CubeCell\0.0.6/cores/asr650x/projects/CubeCellLib.a(AT_Command.o): In function `onUartEvent':

D:\lib/AT_Command.c:1082: undefined reference to `userChannelsMask'

C:\Users\User\AppData\Local\Arduino15\packages\CubeCell\hardware\CubeCell\0.0.6/cores/asr650x/projects/CubeCellLib.a(AT_Command.o): In function `printDevParam':

D:\lib/AT_Command.c:1393: undefined reference to `userChannelsMask'

collect2.exe: error: ld returned 1 exit status

exit status 1

Error compiling for board CubeCell-Board.

Simon

From: Aaron.Lee notifications@github.com Sent: 29 April 2020 10:33 To: HelTecAutomation/ASR650x-Arduino ASR650x-Arduino@noreply.github.com Cc: Si Simon@vaelid.com; Author author@noreply.github.com Subject: Re: [HelTecAutomation/ASR650x-Arduino] Unable to load Board manager V.0.0.6 in Arduino (#86)

Did you delete the V0.0.5 package, and also deleted the cache file in Arduino15 folder?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/HelTecAutomation/ASR650x-Arduino/issues/86#issuecomment-621092723 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AHWHUJJDGZK7YWHV3PHEJZDRO7X6BANCNFSM4MR5RH2Q . https://github.com/notifications/beacon/AHWHUJL32AVOQ6XHOH4BSSTRO7X6BA5CNFSM4MR5RH22YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEUCR64Y.gif

Heltec-Aaron-Lee commented 4 years ago

These days are a national holiday. I am at home and did a complete test on the computer I used to play games (brand new computer), everything seems to be normal:

I think your problem may be because the development environment is also installed in another place. You use new examples, but the development environment and the underlying driver are still old. You need to double check :D

wasn-eu commented 4 years ago

the problem was the missing uint16_t userChannelMask define

HelTecAutomation / CubeCell-Arduino

Unable to load Board manager V.0.0.6 in Arduino #86