What steps will reproduce the problem?
1. create an IntLib project
2. add all the SCH and PCB files from Libs_RRutledge 2013-01-30.zip
3. compile IntLib
What is the expected output? What do you see instead?
should have no errors or warnings. Instead:
customizeMessage List
Date : 12/19/2013
Time : 11:29:54 PM
Elapsed Time : 00:00:00
--------------------------------------------------------------------------------
Class Document Source Message Time Date No.
[Warning] PBL - Connectors.SCHLIB Compiler Duplicate pins in component Pin
USB_TypeB-MH and Pin USB_TypeB-MH 11:23:58 PM 12/19/2013 1
[Warning] PBL - Diodes.SCHLIB Compiler DIODE_100V_1.5A_SMA: Could not find
'DO-214AC, SMA' 11:23:58 PM 12/19/2013 2
[Warning] PBL - Diodes.SCHLIB Compiler DIODE_SCHOTTKY_10MQ100NPBF: Could not
find 'DO-214AC, SMA' 11:23:58 PM 12/19/2013 3
[Warning] PBL - Diodes.SCHLIB Compiler DIODE_SCHOTTKY_30BQ100TRPBF: Could not
find 'DO-214AB, SMC' 11:23:58 PM 12/19/2013 4
[Error] PBL - Electromechanical.SCHLIB Compiler FX2-D3209: Could not find port
'2' on model 'Relay_Tyco_FX2' for pin '2' 11:23:58 PM 12/19/2013 5
[Warning] PBL - Fuses and Protection.SCHLIB Compiler BREAKER_4A5_ETA_1410-L2:
Could not find 'BREAKER_1410-L2' 11:23:59 PM 12/19/2013 6
[Warning] PBL - Fuses and Protection.SCHLIB Compiler SPARKGAP_2850V: Could not
find 'Spark-Gap_2850V' 11:23:59 PM 12/19/2013 7
[Warning] PBL - Fuses and Protection.SCHLIB Compiler TCO_Radial_115degC: Could
not find 'TCO_Aupo_Ax-1A_Radial_THD' 11:23:59 PM 12/19/2013 8
[Warning] PBL - Mechanical.SCHLIB Compiler Cable_C0744A-12-10: Could not find
'ClarisonicLogo' 11:23:59 PM 12/19/2013 9
[Warning] PBL - Mechanical.SCHLIB Compiler HEATSINK_SMD_TO-268: Could not find
'HEATSINK_TO-268' 11:23:59 PM 12/19/2013 10
[Warning] PBL - Mechanical.SCHLIB Compiler SHIELD_RECT_0.75x1.125x0.25in: Could
not find 'SHIELD_RECT_0.75x1.125x0.25in' 11:23:59 PM 12/19/2013 11
[Error] PBL - Integrated Circuits.SCHLIB Compiler IC_Op-Amp_AD8513: Could not
find port '34' on model 'TSSOP65P640X120-14N' for pin '34' 11:23:59 PM
12/19/2013 12
[Warning] PBL - Integrated Circuits.SCHLIB Compiler RFID_CR95HF: Could not find
'QFN50P500X500X100-33N' in 'L:\Eng\Electrical
Engineering\Hardware\Altium\Libraries and Templates\PCB Libraries\PBL - SMD
Packages.PcbLib' 11:24:00 PM 12/19/2013 13
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler JUMP_NETTIE: Could not find
'NetTie_External_24mil' 11:24:00 PM 12/19/2013 14
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler JUMP_NETTIE: Could not find
'NetTie_Internal1_24mil' 11:24:00 PM 12/19/2013 15
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler JUMP_NETTIE: Could not find
'NetTie_Internal2_24mil' 11:24:00 PM 12/19/2013 16
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler MH_Plated_40mil: Could not
find 'MH_PLATED_40mil ID x 100mil OD' 11:24:00 PM 12/19/2013 17
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler MH_Plated_112mil: Could not
find 'MH_PLATED_112 ID x 260mil OD' 11:24:00 PM 12/19/2013 18
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler MH_Plated_125mil: Could not
find 'MH_PLATED_125 ID x 260mil OD' 11:24:00 PM 12/19/2013 19
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler MH_Plated_150mil: Could not
find 'MH_PLATED_150ID x 220mil OD' 11:24:00 PM 12/19/2013 20
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler Proto_Block_8x2: Could not
find 'Breakout_8x2' 11:24:00 PM 12/19/2013 21
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler Proto_Block_25x51: Could not
find 'BreadBoard_25x51' 11:24:00 PM 12/19/2013 22
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler Term1: Could not find
'THP_D38_T75_B125' 11:24:00 PM 12/19/2013 23
[Warning] PBL - Pads and Jumpers.SCHLIB Compiler Term_small: Could not find
'THP_D38_T75_B75' 11:24:00 PM 12/19/2013 24
[Warning] PBL - Switches.SCHLIB Compiler SW_THT_PB_8.0mm: Could not find
'TACT-SWITCH-TS1180' 11:24:01 PM 12/19/2013 25
[Warning] PBL - Test Points.SCHLIB Compiler TESTPOINT: Could not find
'THP_D38_T75_B75' 11:24:01 PM 12/19/2013 26
[Warning] PBL - Test Points.SCHLIB Compiler TESTPOINT_LEAD: Could not find
'THP_D46_T80_B80' 11:24:01 PM 12/19/2013 27
[Warning] PBL - Resistors.SCHLIB Compiler RES_TRIMMER_10K_1T_THT: Could not
find 'POT_3306F' 11:24:02 PM 12/19/2013 28
[Warning] PBL - Connectors.SCHLIB Compiler 6P_RA_TERM BLOCK HEADER: Could not
find '6P_PCB_TERM BLOCK HDR_RA' 11:24:02 PM 12/19/2013 29
[Warning] PBL - Connectors.SCHLIB Compiler 6P_TERM BLOCK HEADER: Could not find
'6P_PCB_TERM BLOCK HDR' 11:24:02 PM 12/19/2013 30
[Error] PBL - Connectors.SCHLIB Compiler CONN_DIN_4PIN: Could not find port
'MH' on model 'CONN_PWR-DIN_4PIN_PD-40S' for pin 'MH' 11:24:02 PM 12/19/2013 31
[Warning] PBL - Connectors.SCHLIB Compiler CONN_JMP_RA: Could not find
'JMP2_RA' 11:24:03 PM 12/19/2013 32
[Warning] PBL - Connectors.SCHLIB Compiler CONN_MINIPHONEJACK: Could not find
'CONN_PhoneMiniStereo' 11:24:03 PM 12/19/2013 33
[Warning] PBL - Connectors.SCHLIB Compiler CONN_PJ-036A: Could not find
'CUI_PJ-036A-SMT' 11:24:03 PM 12/19/2013 34
[Warning] PBL - Connectors.SCHLIB Compiler Header4P: Could not find
'CONN_FLATFLEX_4C_1MMP_3MML_BOT' 11:24:03 PM 12/19/2013 35
[Warning] PBL - Connectors.SCHLIB Compiler Header4P: Could not find
'CONN_FLATFLEX_4C_1MMP_3MML_TOP' 11:24:03 PM 12/19/2013 36
[Warning] PBL - Connectors.SCHLIB Compiler Header4P: Could not find
'CONN_FLATFLEX_4C_1MMP_5MML' 11:24:03 PM 12/19/2013 37
[Warning] PBL - Connectors.SCHLIB Compiler USB_Micro_TypeB: Could not find
'USB_Micro-B_Molex_SMD' 11:24:03 PM 12/19/2013 38
[Warning] PBL - Inductors.SCHLIB Compiler INDC_47n_1008_1A: Could not find
'INDM2520X190N' 11:24:03 PM 12/19/2013 39
[Warning] PBL - Inductors.SCHLIB Compiler INDC_150n_1008: Could not find
'INDM2520X190N' 11:24:03 PM 12/19/2013 40
[Warning] PBL - Batteries.SCHLIB Compiler BATT_AAAx2_600mAh: Could not find
'BAT-AAA-2' 11:24:03 PM 12/19/2013 41
[Warning] PBL - Batteries.SCHLIB Compiler BATT_AAx2_600mAh: Could not find
'BAT-AA-2' 11:24:03 PM 12/19/2013 42
[Warning] PBL - Batteries.SCHLIB Compiler BATT_AAx2_900mAh: Could not find
'BAT-AA-2' 11:24:03 PM 12/19/2013 43
[Warning] PBL - Batteries.SCHLIB Compiler BATT_AAx2_1300mAh: Could not find
'BAT-AA-2' 11:24:03 PM 12/19/2013 44
[Warning] PBL - Capacitors.SCHLIB Compiler CAPE_1m_10V_SMD: Could not find
'CAP_ELEC_Size G' 11:24:04 PM 12/19/2013 45
[Warning] PBL - Capacitors.SCHLIB Compiler CAPE_10u_100V_SMD: Could not find
'CAP_ELEC_Size E' 11:24:04 PM 12/19/2013 46
[Warning] PBL - Capacitors.SCHLIB Compiler CAPE_47u_100V_SMD: Could not find
'CAP_ELEC_Size H13' 11:24:04 PM 12/19/2013 47
[Warning] PBL - Capacitors.SCHLIB Compiler CAPE_220u_10V_SMD: Could not find
'CAP_ELEC_Size E' 11:24:04 PM 12/19/2013 48
[Warning] PBL - Capacitors.SCHLIB Compiler CAPE_220u_16V_THD_2.5mmLS: Could not
find 'CAPE2.5mm_max6.8x12.5mm' 11:24:04 PM 12/19/2013 49
[Warning] PBL - Capacitors.SCHLIB Compiler CAPF_120n_2416_PPS_50V: Could not
find 'CAPC6041X210N' 11:24:04 PM 12/19/2013 50
[Warning] PBL - Capacitors.SCHLIB Compiler CAPMF_220n_100V_MPR: Could not find
'CAPMF5_3.5-5.0-7.5mm' 11:24:04 PM 12/19/2013 51
Back to top
What version of the product are you using? On what operating system?
AD10, WinXP SP2
Please provide any additional information below.
Original issue reported on code.google.com by bowerym...@gmail.com on 20 Dec 2013 at 4:32
Original issue reported on code.google.com by
bowerym...@gmail.comon 20 Dec 2013 at 4:32