Stuck on pairing 1

[krjw]

So I got everything working... but my iOS device can not find the esp.... it is stuck on pairing 1

Any suggestions? Thanks in advance! Good work on the HomeKit project btw.!!

Greetings, i7clock

[krjw]

Maybe some extra information would help!:

�EUM�VA�����������\�aӌ�\OABae�� ets Jan 8 2013,rst cause:2, boot mode:(3,6)

load 0x40100000, len 30700, room 16 tail 12 chksum 0x7b ho 0 tail 12 room 4 load 0x3ffe8000, len 2860, room 12 tail 0 chksum 0x3c load 0x3ffe8b40, len 3184, room 8 tail 8 chksum 0x6a csum 0x6a OS SDK ver: 1.5.0-dev(1aafc07) compiled @ May 17 2017 10:13:23 phy ver: 1055_1, pp ver: 10.7

rf cal sector: 11 tcpip_task_hdl : 3fff0910, prio:10,stack:512 idle_task_hdl : 3fff09b0,prio:0, stack:384 tim_task_hdl : 3fff3168, prio:2,stack:512 start of user_init @ 81 hkc by HomeACcessoryKid! Compiled Jun 10 2017@18:01:37 Heap: 48472 EspMsgMutex created

---

key loaded: 0 pairing: 1 ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff myUsername: end of user_init @ 148 mode : sta() + softAP() add if0 dhcp server start:(ip:192.168.4.1,mask:255.255.255.0,gw:192.168.4.1) add if1 bcn 100 system time: 173 s: b: **** scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 2 cnt

connected with **, channel 1 dhcp client start... ip:,mask:255.255.255.0,gw: srp_prepare done: system time: 24685 B: **** ServerInitPriority:1 pairing 1, heap 31936, system time=24872 waiting for task pairing 1, heap 31936, system time=27871 pairing 1, heap 31936, system time=30871 pairing 1, heap 31936, system time=33871

[krjw]

ok nevermind ... my ios device kept on switching wifis ^^