Blower Fan Duct not solid

Hooklet3d / OdinOne

Odin One 3d RepRap 3d Printer

https://hooklet3d.com/promotions/odin_one.html

GNU General Public License v3.0

1 stars 2 forks source link

Blower Fan Duct not solid #58

Closed BotleHewer closed 7 years ago

BotleHewer commented 7 years ago

Fan duct design for blower fan (https://github.com/Hooklet3d/OdinOne/blob/Mentos_RC/Parts/OdinOne/Mods/Active_Cooling/MK8_DraftCooler/Fan_Duct_DraftCoolerMK8.stl) is not solid. Causing issues in S3d where it tries to bridge a solid floor mid way up part. see screen cap. capture

Attempt to fix by making solid in Meshmixer.

BotleHewer commented 7 years ago

Part run through make solid and commited to MC #3a03137.

Update: Slicing is revealing small hole in site of duct. see screen cap: capture2

3dGriff commented 7 years ago

@BotleHewer I just added a duct with an altered angle, check out the file in commit 92b1064c5126dc025e64072dadda26c2cc1ede12 I think it's best to just fix it now if you could.

Be aware of the slight indentation at the top of the duct (the part that attaches to the fan) this was added to provide a tighter fit and make sure the duct does not fall off during printing.

BotleHewer commented 7 years ago

@3dGriff It appears above issues are not present in latest version of duct.

S3D verified. Will be printing shortly.

Issue can be closed IMO

3dGriff commented 7 years ago

@BotleHewer that's good to know, as a heads up your nozzle may be slightly higher or lower than the current machine, verify dimension and positioning with that in mind.