I'm running a Delta 44 sound card with LP-Pan and a K3. The computer is a Dell
XPS 410 running Windows XP Service Pack 3.
The problem I was having was that PowerSDR would lose control/sync with the K3
after tuning around for awhile. Noticed that it seemed to occur after tuning
caused a mode change, as when one band was in CW mode while another band was in
a SSB mode or when hitting the band button multiple times causing mode changes.
I was running with different buffer sizes across modes and setting all modes
to the same buffer sizes has solved the problem.
To cause the problem --
In setup/Audio and on Delta 44, set buffer size to 512.
In setup/DSP/Options, for Phone and digital set RX:4096, TX:1024, but for CW
set RX:4096, TX:512.
Now start up powersdr and tune around in such a way that mode changes occur.
I think you'll find that things start going haywire and, in particular, you'll
lose communication with the k3.
To fix the problem, set buffers for all modes to, say, RX:4096, TX:1024 and
also set the Audio buffer size to 1024.
Original issue reported on code.google.com by from...@gmail.com on 20 Sep 2010 at 6:18
Original issue reported on code.google.com by
from...@gmail.com
on 20 Sep 2010 at 6:18