BNNorman
commented
7 months ago This is where it's at...
Open bsimmo opened 7 months ago
BNNorman
commented
7 months ago This is where it's at...
bsimmo
commented
7 months ago This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN4GPHAIC5BCCEHJGA3YYBHJXAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGM4TKNJWHA . You are receiving this because you authored the thread.Message ID: @.***>
BNNorman
commented
7 months ago ??? The UF2 files are there to load onto a Pico On 13/03/2024 13:30:31, Ben @.***> wrote: This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN4GPHAIC5BCCEHJGA3YYBHJXAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGM4TKNJWHA . You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994411892], or unsubscribe [https://github.com/notifications/unsubscribe-auth/ADY5NXNMXBLXNJESMNMQ4MLYYBIHPAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTCOBZGI]. You are receiving this because you commented.Message ID: @.***> [0832f4ba-4721-4865-8913-163b26a4bee6]
bsimmo
commented
7 months ago Yes over there in that repository, but the repository I am in here is not that one. Here it is the physical stuff, the wheels the part list, the body... They are all at Uno 2018 standards. Quote These files contain construction details, stl files for 3d printing and dxf files for laser cutting robots.
On Wed, 13 Mar 2024, 1:32 pm Brian, @.***> wrote:
??? The UF2 files are there to load onto a Pico On 13/03/2024 13:30:31, Ben @.***> wrote: This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub < https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACYAXN4GPHAIC5BCCEHJGA3YYBHJXAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGM4TKNJWHA>
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [ https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994411892], or unsubscribe [ https://github.com/notifications/unsubscribe-auth/ADY5NXNMXBLXNJESMNMQ4MLYYBIHPAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTCOBZGI].
You are receiving this because you commented.Message ID: @.***> [0832f4ba-4721-4865-8913-163b26a4bee6]
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994416384, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN7XZBOIEYFYP6ZMIGLYYBIQDAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTMMZYGQ . You are receiving this because you authored the thread.Message ID: @.***>
BNNorman
commented
7 months ago Ok, the physical bot hasn't changed only the electronics.
I saw Rob this morning and , because Ross is bringing a bunch of UNO/Wemos devices, Rob is in two minds about building Pico bots or just using the Uno bots.
If you are still buying a bunch of Pico-W I will have two and I think Ross said he'd have one. On 13/03/2024 13:53:08, Ben @.***> wrote: Yes over there in that repository, but the repository I am in here is not that one. Here it is the physical stuff, the wheels the part list, the body... They are all at Uno 2018 standards. Quote These files contain construction details, stl files for 3d printing and dxf files for laser cutting robots.
On Wed, 13 Mar 2024, 1:32 pm Brian, @.***> wrote:
??? The UF2 files are there to load onto a Pico On 13/03/2024 13:30:31, Ben @.***> wrote: This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub < https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACYAXN4GPHAIC5BCCEHJGA3YYBHJXAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGM4TKNJWHA>
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [ https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994411892], or unsubscribe [ https://github.com/notifications/unsubscribe-auth/ADY5NXNMXBLXNJESMNMQ4MLYYBIHPAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTCOBZGI].
You are receiving this because you commented.Message ID: @.***> [0832f4ba-4721-4865-8913-163b26a4bee6]
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994416384, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN7XZBOIEYFYP6ZMIGLYYBIQDAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTMMZYGQ . You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994460172], or unsubscribe [https://github.com/notifications/unsubscribe-auth/ADY5NXKSKBMGHF3M3S6V54DYYBK4JAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQ3DAMJXGI]. You are receiving this because you commented.Message ID: @.***> [827eab7d-5241-459e-8a8e-be628af1e35e]
bsimmo
commented
7 months ago Really just an update to the list of parts in here, the pico set and the ESP setup. No changes to the mountings?
And there is a pull request waiting I see, looks to be for different shaped driver boards.
Brain transplant the Pico in? , but I think some seemed interested in the actual build part of it.
On Wed, 13 Mar 2024, 2:01 pm Brian, @.***> wrote:
Ok, the physical bot hasn't changed only the electronics.
I saw Rob this morning and , because Ross is bringing a bunch of UNO/Wemos devices, Rob is in two minds about building Pico bots or just using the Uno bots.
If you are still buying a bunch of Pico-W I will have two and I think Ross said he'd have one. On 13/03/2024 13:53:08, Ben @.***> wrote: Yes over there in that repository, but the repository I am in here is not that one. Here it is the physical stuff, the wheels the part list, the body... They are all at Uno 2018 standards. Quote These files contain construction details, stl files for 3d printing and dxf files for laser cutting robots.
On Wed, 13 Mar 2024, 1:32 pm Brian, @.***> wrote:
??? The UF2 files are there to load onto a Pico On 13/03/2024 13:30:31, Ben @.***> wrote: This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub <
https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568>,
or unsubscribe <
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [
https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994411892],
or unsubscribe [
You are receiving this because you commented.Message ID: @.***> [0832f4ba-4721-4865-8913-163b26a4bee6]
— Reply to this email directly, view it on GitHub < https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994416384>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACYAXN7XZBOIEYFYP6ZMIGLYYBIQDAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTMMZYGQ>
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [ https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994460172], or unsubscribe [ https://github.com/notifications/unsubscribe-auth/ADY5NXKSKBMGHF3M3S6V54DYYBK4JAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQ3DAMJXGI].
You are receiving this because you commented.Message ID: @.***> [827eab7d-5241-459e-8a8e-be628af1e35e]
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994477734, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN5LRA76ZXYVBEL3PCDYYBL3FAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQ3TONZTGQ . You are receiving this because you authored the thread.Message ID: @.***>
BNNorman
commented
7 months ago Ok, see you wed. On 13/03/2024 15:16:25, Ben @.***> wrote: Really just an update to the list of parts in here, the pico set and the ESP setup. No changes to the mountings?
And there is a pull request waiting I see, looks to be for different shaped driver boards.
Brain transplant the Pico in? , but I think some seemed interested in the actual build part of it.
On Wed, 13 Mar 2024, 2:01 pm Brian, @.***> wrote:
Ok, the physical bot hasn't changed only the electronics.
I saw Rob this morning and , because Ross is bringing a bunch of UNO/Wemos devices, Rob is in two minds about building Pico bots or just using the Uno bots.
If you are still buying a bunch of Pico-W I will have two and I think Ross said he'd have one. On 13/03/2024 13:53:08, Ben @.***> wrote: Yes over there in that repository, but the repository I am in here is not that one. Here it is the physical stuff, the wheels the part list, the body... They are all at Uno 2018 standards. Quote These files contain construction details, stl files for 3d printing and dxf files for laser cutting robots.
On Wed, 13 Mar 2024, 1:32 pm Brian, @.***> wrote:
??? The UF2 files are there to load onto a Pico On 13/03/2024 13:30:31, Ben @.***> wrote: This is the component checklist and stl/dxf section. Not the code.
On Wed, 13 Mar 2024, 1:22 pm Brian, @.***> wrote:
This is where it's at...
https://github.com/HullPixelbot/PICO-HullPixelbot
— Reply to this email directly, view it on GitHub <
https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994395568>,
or unsubscribe <
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [
https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994411892],
or unsubscribe [
You are receiving this because you commented.Message ID: @.***> [0832f4ba-4721-4865-8913-163b26a4bee6]
— Reply to this email directly, view it on GitHub < https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994416384>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACYAXN7XZBOIEYFYP6ZMIGLYYBIQDAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQYTMMZYGQ>
. You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [ https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994460172], or unsubscribe [ https://github.com/notifications/unsubscribe-auth/ADY5NXKSKBMGHF3M3S6V54DYYBK4JAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQ3DAMJXGI].
You are receiving this because you commented.Message ID: @.***> [827eab7d-5241-459e-8a8e-be628af1e35e]
— Reply to this email directly, view it on GitHub https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994477734, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACYAXN5LRA76ZXYVBEL3PCDYYBL3FAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGQ3TONZTGQ . You are receiving this because you authored the thread.Message ID: @.***>
— Reply to this email directly, view it on GitHub [https://github.com/HullPixelbot/Hardware/issues/2#issuecomment-1994638656], or unsubscribe [https://github.com/notifications/unsubscribe-auth/ADY5NXJVBXYUBMNMC6YWIALYYBUUTAVCNFSM6AAAAABEUBUX3SVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGYZTQNRVGY]. You are receiving this because you commented.Message ID: @.***> [d9257216-0829-41cb-a054-24395ebf0566]
CrazyRobMiles
commented
7 months ago Sorry for the confusion folks. I need to pull the whole thing together a bit more. The plan for robots going forwards is to use PICOW plugged into a breadboard (I've got a bunch of them). The breadboard can be stuck straight onto the top plate of the robot (we flip the plate upside down if it is a 3D printed one with pillars for an Arduino). I'm going to bring some of my laser cut chassis components and some bits and bobs for next week if someone really wants to build from scratch.
Are there any updates for the Pico setup, enhancements, etc..