search

HumanDynamics / openbadge

MIT License
49 stars 19 forks source link

Updated LIS2DH12 component to be compliant with design guideline. #86

Closed techboycr closed 6 years ago

techboycr commented 6 years ago

Cpmpliant with the technical notes http://www.st.com/content/ccc/resource/technical/document/technical_note/73/17/9c/16/dd/96/4a/01/CD00134799.pdf/files/CD00134799.pdf/jcr:content/translations/en.CD00134799.pdf

Traces are smaller in the comnnectios and PCB land for pads is longer and located under the component footprint.

techboycr commented 6 years ago
  1. This is now in the library as another option of package: lis2dh12
  2. Drill is updated.
  3. Path fixed.
  4. Fixed as well.

Other things to pay attention to:

  1. Paths entering to the LIS2DH where change from 4mil to 8mill, to prevent drc error(the image below was taken before changes).
  2. 3 clearence issues where approved because they happened as product of the changes in the library. component issues
  3. There is an Overlapp in this component I dont know if was product of changes I made, please confirm so I can proceed to fix this: screenshot from 2018-01-16 20-33-10
OrenLederman commented 6 years ago

  1. Please keep the traces 4mil - that's what the pcba place asked us. Can we update the drc (in eagle/misc/pcbng2layer_v1.1_openbadge_variation.cam) to allow it? In any case it should be ok. I uploaded the schematics you sent me the other day and the pass validation

  2. Clearance should be ok to approve. Will double check with PCB.ng after I upload this design

3.The overlap was there before. My mistake. You can fix it :)

OrenLederman commented 6 years ago

There are still a couple of small things, but i'll fix them. I might need to merge and then make the changes, because it looks like Eagle insists on taking the wrong copy of the library.