Open GoogleCodeExporter opened 8 years ago
AIDA 64 says this:
Informationsliste Wert
Sensor Eigenschaften
Sensortyp ITE IT8720F (ISA 228h)
GPU Sensortyp Diode, CHiL CHL8214 (ATI-Diode, 30h)
Motherboard Name Gigabyte 890GPA-UD3H / 990FXA / 990XA Series
Gehäusezutritt gefunden Nein
Temperaturen
Motherboard 34 °C (93 °F)
CPU 29 °C (84 °F)
1. CPU / 1. Kern 15 °C (59 °F)
1. CPU / 2. Kern 15 °C (59 °F)
1. CPU / 3. Kern 15 °C (59 °F)
1. CPU / 4. Kern 15 °C (59 °F)
1. CPU / 5. Kern 15 °C (59 °F)
1. CPU / 6. Kern 15 °C (59 °F)
GPU Diode (DispIO) 29 °C (84 °F)
GPU Diode (MemIO) 30 °C (86 °F)
GPU Diode (Shader) 32 °C (90 °F)
SAMSUNG HD103UJ 31 °C (88 °F)
WDC WD5000AAKS-07YGA0 37 °C (99 °F)
Kühllüfter
CPU 801 RPM
Gehäuse #1 678 RPM
Gehäuse #2 1461 RPM
Grafikprozessor (GPU) 2090 RPM (55%)
Spannungswerte
CPU Kern 1.088 V
+3.3 V 3.360 V
+12 V 12.302 V
VBAT Batterie 2.992 V
DIMM 1.488 V
GPU +12V 12.125 V
GPU VRM 0.945 V
Strom Werte
GPU VRM 4.00 A
Original comment by wavingecko
on 14 Jan 2012 at 2:11
The following is a copy of a comment from "wavingecko" posted wrongly on Issue
311:
jepp, just uploaded an report with open HardwareControl
i just renamed it by googeling the temperatues for the mainboard.
So the AMD-FX-Temp. is wrong
Mainboard Temps should be
Temp1: System
Temp2: power (if supported)
Temp3: CPU
Original comment by moel.mich
on 15 Jan 2012 at 5:25
Attachments:
I am getting about 9 degrees of Idle Temp / About 25 degrees of load temp on an
AMD FX 6100 Chip which can't be right.
Using HW Monitor 0.4 Beta
Original comment by testm...@dingbone.com
on 13 Mar 2012 at 8:17
edit: attached report
Original comment by testm...@dingbone.com
on 13 Mar 2012 at 12:17
Attachments:
As far as I know this is an issue with the AMD CPUs. AMD has documented for
quite some time that the "core temperature" accessible through registers is not
really on a degree Celsius scale, but on a virtual one. Nevertheless, on older
CPUs this has given good enough results. See also the attached part of the
"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 15h Models 00h-0Fh
Processors".
The offset isn't really known, it might not even be constant per CPU type. So
currently I do not see any way to fix this issue. See also the Core Temp forum.
http://www.alcpu.com/forums/viewtopic.php?f=62&t=2231
If the latest version of Core Temp gives different results than the Open
Hardware Monitor, I might look into it once more.
The readings for the CPU temperature obtained from the mainboard should be the
same as in other software (but still different from the core sensors results).
If you see any indication for what might be wrong or how to fix (or obtain info
for a fix), please let me know.
Original comment by moel.mich
on 4 Feb 2013 at 9:09
Attachments:
Issue 431 has been merged into this issue.
Original comment by moel.mich
on 27 Jun 2013 at 8:43
Issue 438 has been merged into this issue.
Original comment by moel.mich
on 27 Jun 2013 at 8:43
Issue 457 has been merged into this issue.
Original comment by moel.mich
on 27 Jun 2013 at 8:47
Issue 454 has been merged into this issue.
Original comment by moel.mich
on 27 Jun 2013 at 8:58
Issue 410 has been merged into this issue.
Original comment by moel.mich
on 29 Jun 2013 at 4:25
Original issue reported on code.google.com by
wavingecko
on 14 Jan 2012 at 11:36