Aquire and familiarize with hardware boards

IL2232-HT2022-HIL / HARDWARE_DEV

Hardware development for the project

0 stars 0 forks source link

Aquire and familiarize with hardware boards #3

Closed HolgerStenberg closed 2 years ago

HolgerStenberg commented 2 years ago

Find out about, install development environment.

HolgerStenberg commented 2 years ago

There are two boards that will be part of the project:

The MCU Development Board: Nucleo-L476RG (64 pin)
The MCU HiL Board : Nucleo-F767ZI (144 pin)

I will investigate if these boards can be found as CAD-files

HolgerStenberg commented 2 years ago

CAD files found, working on integrating the two boards (adapter outline)

HolgerStenberg commented 2 years ago

Additional information from mattias regarding what signals that are of interest is required to continue

HolgerStenberg commented 2 years ago

MII or RMII ehternet interface?

[ ] Solved?

sofiecmf commented 2 years ago

We need for sure that these peripherals exists and do not collide with anything else :

1 USART bus 1 I2C bus 1 SPI bus Ethernet (RMII or MII) DAC for HiL (for potentiometer emulator) ADC for Development MCU (for potentiometer read)

HolgerStenberg commented 2 years ago

We are thinking of combining the power from both pcbs with only one usb cable (for ease-of-use). Currently looking into how to configure the boards such that the MCU Development Board can power the adapter board and the HiL Board

HolgerStenberg commented 2 years ago

On small board: dis-connect JP1 for 300 mA over ST-link