Open ArvidsO opened 2 years ago
ArvidsO proposal is supported by the submitting organisation LGIA
Dear @ArvidsO, @valdisbb
In order to present this change proposal for approval in the next sub-group meeting, we would like to inform you about the details that will be carried out. On the basis of the document, the following layers would be added:
By qualifying points (1) and (2), a layer will be added for each NaturalHazardCategory codelist item and in the attribute “SpatialObjectType” all the four relevant feature types (HazardArea, HazardAreaCoverage, ObservedEvent and ObservedEventCoverage) will be mentioned.
Regards
Hello everyone!
It's fine! I would like to stress your attention to the INSPIRE layer register. It includes only one Natural Hazard layer type - ExposedElement. It meen that we have no legal choices to show in services different hazard types!!!
[image: image.png]
Best regards,
Arvids
On Thu, 19 Oct 2023 at 10:54, arantzaetxebarria @.***> wrote:
Dear @ArvidsO https://github.com/ArvidsO, @valdisbb https://github.com/valdisbb
In order to present this change proposal for approval in the next sub-group meeting, we would like to inform you about the details that will be carried out. On the basis of the document https://eur-lex.europa.eu/eli/reg/2010/1089, the following layers would be added:
[image: image] https://user-images.githubusercontent.com/64014694/276527813-815344c0-df6a-4960-abfb-8429ab663cc8.png
By qualifying points (1) and (2), a layer will be added for each NaturalHazardCategory codelist https://inspire.ec.europa.eu/codelist/NaturalHazardCategoryValue item and in the attribute “SpatialObjectType” all the four relevant feature types (HazardArea, HazardAreaCoverage, ObservedEvent and ObservedEventCoverage) will be mentioned.
Regards
— Reply to this email directly, view it on GitHub https://github.com/INSPIRE-MIF/helpdesk-registry/issues/28#issuecomment-1770261565, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJFWM335BS563EFG4Z7DSMDYADMDDAVCNFSM5NIRDRCKU5DIOJSWCZC7NNSXTN2JONZXKZKDN5WW2ZLOOQ5TCNZXGAZDMMJVGY2Q . You are receiving this because you were mentioned.Message ID: @.***>
In the MIWP Action 2.3.1 MIG-T Sub-group Meeting on 10/11/2023, it was decided to put this proposal on hold. Further changes to the NZ Technical Guidelines will be proposed by Istituto Superiore per la Protezione e la Ricerca Ambientale (ISPRA) by the end of 2023 which may affect / contribute to the layers proposed in this document. Therefore, it was agreed to wait for these technical guidelines changes before processing the current change proposal.
Hello everyone! It's fine! I would like to stress your attention to the INSPIRE layer register. It includes only one Natural Hazard layer type - ExposedElement. It meen that we have no legal choices to show in services different hazard types!!!
[image: image.png]
Best regards,
Arvids
Dear @ArvidsO
I would like to comment that even though this proposal has been put on hold, it is possible to add different layers that you need, as the INSPIRE Validator is relaxed in the test related to layer name (is manual) https://github.com/inspire-eu-validation/view-service/blob/master/iso-19128/at39bis-getcapabilities-harmonised-layer-name.md
Regards
In the Layer Register Natural risk zones contain only one layer: NZ.ExposedElement. The Layer Register miss (see in TG):