search

IRNAS / KORUZA-driver-specification

Specification and later documentation for KORUZA open source open hardware driver
Other
0 stars 1 forks source link

Driver reboot #7

Closed VojislavM closed 7 years ago

VojislavM commented 8 years ago

The main CPU could reboot the Koruza driver board with specific communication message, but also this could be done with the simple GPIO pin on the reset pin of the driver MCU. If reset is done over GPIO pin CPU should first send the warning message to the driver board, so the MCU can store the current important values to the EEPROM memory.

VojislavM commented 7 years ago

This is done thru the TLV message REBOOT