search

IRNAS / KORUZA-router

Specification and later documentation for KORUZA open source open hardware router
Other
5 stars 5 forks source link

USB port #4

Open SloMusti opened 8 years ago

SloMusti commented 8 years ago

USB port 2.0 is required. One port for webcam one port for control board in KORUZA specific application. There is also USB 3.0 option on MT7621 which could be implemented, but likely not required in given specifications. If cost is low 3.0 port should be available outside and 2.0 port internally on GPIO header or some socket as on MqMaker WiTi.

Implementation depends on #1

VojislavM commented 8 years ago

USB connection could be done with dual USB connector. This way we would save space on the board, and if the board is used outside of the Koruza unit, we will still have two USB connectors, which is good for the development. alt tag

We should pay attention to the footprint of the USB connector, so it could be replaced with the differnt connector when a board is placed inside of the Koruza unit.

SloMusti commented 7 years ago

We will use one external USB 3.0 port facing the same way as ethernet ports and one internal on the expander board.