IRNAS PiRa-zero issues - Githubissues

IRNAS / PiRa-zero

PiRA - Power in Responsive Applications HAT for Raspberry Pi Zero with RTC for power saving mode.

11 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

assembly v0.3

#19 VojislavM opened 6 years ago
2
version v1.0 MCU

#18 VojislavM opened 6 years ago
0
LifePo4 support

#17 VojislavM opened 6 years ago
0
Add jumper to select Vbat and 5V on Mosfet out

#16 SloMusti opened 7 years ago
1
add resistors

#15 VojislavM opened 7 years ago
2
voltage ADC devider

#14 VojislavM opened 7 years ago
2
timer resistor

#13 VojislavM opened 7 years ago
1
jumper default

#12 VojislavM opened 7 years ago
0
fine tune charge current

#11 VojislavM opened 7 years ago
1
under voltage protection

#10 VojislavM opened 7 years ago
1
signal diodes for gpio

#9 VojislavM opened 7 years ago
2
Timer DOne pull down

#8 VojislavM opened 7 years ago
1
Add Lora module

#7 SloMusti closed 7 years ago
1
Wrong inscription for charging status LED

#6 bbratus closed 7 years ago
0
Wrong footrping in BOM for T2

#5 SloMusti opened 7 years ago
1
MicroUSB port hardware footprint

#4 SloMusti opened 7 years ago
2
Charger PCB change

#3 VojislavM closed 7 years ago
1
Charger not working, fault condition

#2 SloMusti closed 7 years ago
2
Current and voltage measurement - battery indicator

#1 VojislavM closed 7 years ago
2