search

IVProjects / Engineering_Projects

359 stars 81 forks source link

Could you please add GT2 length (teeth) you use for 15:1 Nema Actuator #1

Closed UReinhold closed 2 years ago

IVProjects commented 2 years ago

They are 200mm closed GT2 belt loops.

UReinhold commented 2 years ago

Hi IV Thanks for the very fast "action." ... and congratulations to the (well deserved) skyrocketing subscriptions 👍🤓 While I was very sure about those 200mm I thought it might be a good idea for the originator to post it him-/herself ...where really interested folks would look ;-) ...thus the (non) issue.

Actually NOWI think the "full load of vitamins listed" would be even better 👍🤓

My (shameless) request for a NEMA 23 version is quite serious. (Hobbyist maker and no access to serious CAD (no student etc)) Are you by chance located anywhere in EU ?

Regards Reinhold

P.S.: Printing a test PLA now. Going to use a high performance"long" NEMA17 The NEMA 23 most likely will need a change to HP 500-5M HTD 5M as well...

On Fri, Feb 25, 2022 at 9:01 PM IVProjects @.***> wrote:

They are 200mm closed GT2 belt loops.

— Reply to this email directly, view it on GitHub https://github.com/IVProjects/Engineering_Projects/issues/1#issuecomment-1051184842, or unsubscribe https://github.com/notifications/unsubscribe-auth/ANWWHJXIAED42TUB4H3PMN3U47N2HANCNFSM5PLD6RTQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.

You are receiving this because you authored the thread.Message ID: @.***>

IVProjects commented 2 years ago

Hi Reinhold, I don't currently have any NEMA-23 motors or drivers, since they are quite a bit more expensive than their NEMA-17 counterparts. As you mentioned, it would also need larger and more expensive belts, shafts and bearings. If I had these things on hand I likely would design a larger actuator. Is there a specific purpose for which you need the higher torque?

I am located in the US.