My situation is - in LOW or MEDIUM resolution - where I would use the RGB colour (AKA NOT MONO) Green is substituted for Black - I cannot get the device to produce a BLACK - It is using the STE 50hz profile. My monitor is able to do 50hz. EVERYTHING else looks fine except where a black should be there is Green.
I have adjust every setting in the software I can think of. I have rechecked all my wiring 10+ times.. I am at a loss. Any suggestions would be appreciated
I have posted this in the main Github for the project. - just thought I would post here as well incase some only follow this fork.
IanSB
commented
2 years ago
I have built one of the devices up with a 12bit board I purchased assembled - its an IanSB board.
This is the topic thread I am getting my info from https://www.atari-forum.com/viewtopic.php?t=40201
My situation is - in LOW or MEDIUM resolution - where I would use the RGB colour (AKA NOT MONO) Green is substituted for Black - I cannot get the device to produce a BLACK - It is using the STE 50hz profile. My monitor is able to do 50hz. EVERYTHING else looks fine except where a black should be there is Green.
I have adjust every setting in the software I can think of. I have rechecked all my wiring 10+ times.. I am at a loss. Any suggestions would be appreciated
I have posted this in the main Github for the project. - just thought I would post here as well incase some only follow this fork.