search

Ibrahim778 / USBDisable

Disable the annoying "Connecting" dialog when you connect your vita to your pc
MIT License
24 stars 3 forks source link

PSVita 1000 and 2000 don't work #8

Closed BenMitnicK closed 4 months ago

BenMitnicK commented 4 months ago

I install under *main and reboot but not working with my 2 Vita Strange I don't know why

Ibrahim778 commented 4 months ago

What's your FW version? Double check it's in the right path

BenMitnicK commented 4 months ago

my 2 firmware is 3.60 and installed under *main

Ibrahim778 commented 4 months ago

Double check your file path in the config, make sure you're using the newest version

BenMitnicK commented 4 months ago

USBDisable V3.02 installed under *main at the first place

# henkaku.skprx is hard-coded to load and is not listed here
*main
ur0:tai/henkaku.suprx
ur0:tai/PluginsU/USBDisable.suprx
ur0:tai/PluginsU/QuickMenuReborn.suprx
ur0:tai/PluginsU/custom_warning.suprx
ur0:tai/PluginsU/shellsecbat.suprx
ur0:tai/PluginsU/download_enabler.suprx
#ur0:tai/PluginsU/nolockscreen.suprx
ur0:tai/PluginsU/pngshot.suprx
ur0:tai/PluginsU/fruitpeel.suprx
ur0:tai/PluginsU/PasteUnlock.suprx
ur0:tai/PluginsU/quickmenuplus.suprx
ur0:tai/PluginsU/PSVshellPlus_Shell.suprx
Ibrahim778 commented 4 months ago

Check your boot logs to see if this log is output

Also confirm that you're on retail fw? Have you done something like CEX2REX or CEX2DEX?

BenMitnicK commented 4 months ago

I couldn't find a boot log, I don't know where it is. No, none of that, just VitaRW to have the debugging utility

Ibrahim778 commented 4 months ago

By boot log I meant to look at your printf logs with something like Cat(a)log or PSMLogUSB If you're truly on plain CEX 3.60 fw and you really do have it set up properly then it should be working fine.

BenMitnicK commented 4 months ago

By boot log I meant to look at your printf logs with something like Cat(a)log or PSMLogUSB If you're truly on plain CEX 3.60 fw and you really do have it set up properly then it should be working fine.

yes you are right I installed a modified shell so I am no longer in CEX... I will try to see if I can find the offset

BenMitnicK commented 4 months ago

I tried for find offset ... I decrypted shell but I have some problems ... I have several SceShell which one to choose ?? And what function should I look for ?