IlluminationCreations grandma3_xtouch issues - Githubissues

IlluminationCreations / grandma3_xtouch

Software for using GrandMA3 OnPC with a Behringer X-Touch interface

Other

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Encoder updates are 'stuttery'

#11 IlluminationCreations closed 5 months ago
1
Add delay to master fader updates

#10 IlluminationCreations closed 5 months ago
0
Move channel related management into ChannelGroup from XTouchController

#9 IlluminationCreations closed 5 months ago
0
LUA Crash

#8 IlluminationCreations closed 5 months ago
1
assertion "address.mainAddress == encoder.page && address.subAddress == encoder.channel" failed

#7 IlluminationCreations closed 5 months ago
0
Add delay to updating faders

#6 IlluminationCreations opened 5 months ago
1
Prevent fader motors from engadging when fader button is actively pressed down

#5 IlluminationCreations closed 5 months ago
1
Shutting down the xtouch controller, and powering it back on, does not result in a successful reconnection to server

#4 IlluminationCreations opened 5 months ago
0
Dials should send update data to MA

#3 IlluminationCreations closed 5 months ago
0
Add toggle button that causes all the faders to display the status of all the grand master faders

#2 IlluminationCreations opened 5 months ago
0
Add high frequency update toggle ("turbo" mode)

#1 IlluminationCreations opened 5 months ago
0