search

IndaloTech / ramses_esp

Port evofw3 to Espressif ESP32-S3
10 stars 2 forks source link

Missing devices Evo home uk #10

Closed awhatford closed 1 month ago

awhatford commented 1 month ago

Hi Might be a setup issue on my part. Set up and used a ramses-esp to snoop on my Evohome with the esp in WiFi mqto setup as my ha is on a VM machine. Left everything as default setting up the Ramses-esp and Ramses RF and just locally linked RF to my ha broker within ha and that has found every device by the looks of it great 👍. In the 24h I have had this running I have lost trv's on my Evohome controller and the dhw temperature sensor from the system a quick power cycle restored these or they eventually come back by themselves.

My understanding was that Ramses-esp and the Ramses RF default set up was passive snooping with no active acknowledgement if this is incorrect I will have to reassess my settings.

firmware = ramses_esp version = 0.4.9

All devices were stable and good signal levels until adding the Ramses esp unit and Ramses rf.

awhatford commented 1 month ago

PXL_20241002_211802925.jpg

awhatford commented 1 month ago

Having a look it looks like the Ramses RF is sending commands out to the Ramses esp on mqto so will look in to Ramses RF instead.