search

Inrixia / Floatplane-Downloader

Project for automatically organizing and downloading Floatplane videos for plex.
https://monitor.spookelton.net/public-dashboards/db0aec66747b4950b01b128916eb737e
GNU Affero General Public License v3.0
157 stars 41 forks source link

Issue with downloading to a NAS #6

Closed imlogang closed 6 years ago

imlogang commented 6 years ago

Been having issues when downloading straight to a NAS. Either iSCSI share or SMB share it still gives me errors. Downloading straight to folder on the drive it is installed to is fine however.

https://pastebin.com/M2XqRzTd. Here is my pastebin of the errors.

Thanks!

Inrixia commented 6 years ago

Was it previously working or is this a first install?

Also have you tried pointing it at a symlinked folder or a mounted network share as a drive?

imlogang commented 6 years ago

It works when I change it back to just a folder where it's installed. Haven't adventured to trying to pointing it to somewhere else on the C drive. It's pointed to a mounted network share. I thought it could be because it is seen as a network drive and not a disk physically on the computer so that's when I tried an iSCSI mount to try it that way and it still didn't work.

Inrixia commented 6 years ago

Have you tried syslinking a folder on the nas to your computer drive and then pointing it at that? That should work.

imlogang commented 6 years ago

Created a syslink from my desktop to the NAS and still got the same error.

Created a syslink from the folder it's installed in to my NAS and it works perfect!

imlogang commented 6 years ago

Well. I thought it was going to work. Left it for a bit and came back and it crashed again.

Inrixia commented 6 years ago

It might be a issue with your nas then. I just tried pointing the script at a network share on one of my servers (Windows) and it works fine...

Can you send me what is actually outputted in the console when running it?

imlogang commented 6 years ago

https://puu.sh/zMdib/75b6b13da8.png

That's the output of the command line after starting the batch file.

imlogang commented 6 years ago

https://puu.sh/zMdn1/28d637dc87.png

Seems like instead of going to that folder, it creates each folder. Should I try it that way?

Folder for downloading is ./Videos123/

imlogang commented 6 years ago

Decided to not try it on a VM and it works perfectly. So something to do with that.

Inrixia commented 6 years ago

Did you make sure to have a / at the end of the folder path in the settings? Not that it should matter but that's probably why the folders were being called folder123LinusTechTips etc...

Also from what I could see of that error its nothing to do with the storage... Though It looks like it could be to do with it trying to download youtube videos, could you perhaps try to only download the latest video?

imlogang commented 6 years ago

I was trying to download all of them honestly and I think that's what caused the freak out.

I changed it from 30 pages to 15 and it instantly started working.

Inrixia commented 6 years ago

A while ago I added functionality for it to try and download youtube videos if any posts had them (Some posts contained youtube videos because of a simultaneous release or floatplane issue that were never replaced) So It could actually be a issue to do with that If you want I could probably show you how to disable downloading youtube videos to see if it will let you download the entire floatplane archive.

Though to be honest your likely better off just downloading the last week or so worth of floatplane content and then using 4K Downloader to download all of the other videos off youtube. Youtubes 4k has a much higher bitrate than floatplane ATM sadly.

imlogang commented 6 years ago

Honestly not even sure why I want to download it all, more of just a joke at this point cause I love datahoarding I guess.

But maybe? 1080p is fine for me honestly. But might look in to just downloading the rest from YT although im not sure I can even support their entire YT things lol