search

InsanityAutomation / Marlin

Optimized firmware for RepRap 3D printers based on the Arduino platform.
http://www.marlinfw.org/
GNU General Public License v3.0
452 stars 220 forks source link

TM Info Screens after update issue #115

Closed masc2279 closed 4 years ago

masc2279 commented 4 years ago

Description

images and data on progress screen do not align and is missing items based on the background image. Looks like it still thinks the stock screens are there vs the CR-XABL_Screens_V2Rev1.7z screens as seen on image below

TouchScreen

Steps to Reproduce

  1. Get CrealityDwin_2.0
  2. Configure for CR10XMax
  3. Upload firmware to printer
  4. Upload CR-XABL_Screens_V2Rev1.7z to screen.
  5. Start Print

Expected behavior: Data should be present and aligned on screen

Actual behavior: Missing data and alignment is based on stock screens

InsanityAutomation commented 4 years ago

It sounds like something went wrong packaging the CRX screens. Ill go over them this weekend.

masc2279 commented 4 years ago

Thank you !

InsanityAutomation commented 4 years ago

Fixed, the uploaded archive had 2 bin files inside, the naming the dgus tool uses and what the screen looks for. Correct data was in the default export name and the screen used the old files! Regardless, fresh archive is loaded. If anything was missed, just reopen the issue.

masc2279 commented 4 years ago

Screens look good opened another ticket up for CrealityDwin2.0_Bleeding the sounds are all not working or broken uploaded audio recording as well on that ticket.

Thanks for your help.

LMS0815 commented 4 years ago

I am facing the same issue. Where can I find CR-XABL_Screens_V2Rev1.x.7z version? Version CR-XABL_Screens_V2Rev1.1.7z looks strange to me.

/DWIN_SET/ contains 4 *.bin files and a sub folder /14/ containing a file bin. as well. I assume it should be 14.bin and not 14/bin..

Found: https://github.com/InsanityAutomation/Marlin/blob/CrealityDwin2.0_Bleeding/CR-XABL_Screens_V2Rev2.7z

masc2279 commented 4 years ago

I am facing the same issue. Where can I find CR-XABL_Screens_V2Rev1.x.7z version? Version CR-XABL_Screens_V2Rev1.1.7z looks strange to me.

/DWIN_SET/ contains 4 *.bin files and a sub folder /14/ containing a file bin. as well. I assume it should be 14.bin and not 14/bin..

Found: https://github.com/InsanityAutomation/Marlin/blob/CrealityDwin2.0_Bleeding/CR-XABL_Screens_V2Rev2.7z

Just a heads up that the screens work in that file but there is a sound bug that i have opened on that you might want to set your sound down to mute .... But the screens do work at least on my machine now

LMS0815 commented 4 years ago

Thank you. @masc2279 I can not reproduce the sound bug with my CR-X (CRX_BLT_UBL_Fil_DW6.hex). I just needed to lower volume, which is 100% after update.