search

InsanityAutomation / Marlin

Optimized firmware for RepRap 3D printers based on the Arduino platform.
http://www.marlinfw.org/
GNU General Public License v3.0
449 stars 220 forks source link

Screen Doesnt work properly Ender 7 #242

Closed BlauMink closed 2 years ago

BlauMink commented 2 years ago

Description

just installed the software on my ender 7, tried many times but i allways end up getting corrupted images when i open certain menus

Steps to Reproduce

  1. Flash the latest version of the Screen frimware
  2. try to check software version, or refuel the printer or stopping the mottors, it either doesnt work or just shows a corrupted image

Expected behavior: to see the menu images working how they are suposed to, Aka normal functionallity

Actual behavior: cant disconect the motors and certain menus appear like corrupted images

Additional Information

i tried re-downloading the files, different versions and flashing the screen and printer several times with no success im using the latest version of your firmware for the printer, 7.4.4, version with bl touch plugged in the z stop port im also using 7-zip to unpack everything, and when inspecting the images themselves everything seems to be ok

images of some of the problems, also the "control motors" menu directly wont open https://imgur.com/gallery/nbnsdQr

BlauMink commented 2 years ago

i also just discovered that i cannot stop/abort prints

aaron-hentschel commented 2 years ago

I have a very similar issue on my Sermoon D1 as @BlauMink has on his Ender 7.

It would also be great if the Z+ and Z- buttons could be swapped around on the Move screen since the Z axis as home at the top of the chassis (move the Z+ to the bottom of the screen and Z- to the top)

InsanityAutomation commented 2 years ago

Ive been trying different archiver / browser combinations and havnt found a rhyme or reason yet to when it decides to corrupt the flashed ICL... I have one machine that i havnt seen a corrupted display on yet, and another that seems to be 50/50. I did get an update to the dgus software from 8.2.10 to 8.2.14 yesterday that im hoping will be more stable... Ill be working on it over the holiday break a bit.

InsanityAutomation commented 2 years ago

update resolves screen corruption issues.