i have a stock standard cr-x and i installed the CRX_NoFil_DW7.4.6 firmware and the TM3D_Combined480272_Landscape screen firmware and everything seemed to be perfect but when i went to print one of my models it was weak and much less filament was used.
the model would normally be 19grams but this one was only 12grams and it was visibly different and extremely weak.
i tried both from sd and octoprint with the same results.
i tried a different model that i have printed many of with the same strange weak result.
i also tried CRX_NoFil_DW7.4.4 but i had the same weak result.
the gcode files are the same ones i have printed many of these parts from.
after much hassle i managed to get the stock firmware back on the machine but the screen is messed up because the stock screen firmware seems to be missing stuff but i got it working and did the print again and it printed fine and it was the expected 19grams and was strong.
my machine has no mods and is the stock noisy mainboard so is there something i am doing wrong here or is it an issue with the firmware?
i have a stock standard cr-x and i installed the CRX_NoFil_DW7.4.6 firmware and the TM3D_Combined480272_Landscape screen firmware and everything seemed to be perfect but when i went to print one of my models it was weak and much less filament was used. the model would normally be 19grams but this one was only 12grams and it was visibly different and extremely weak. i tried both from sd and octoprint with the same results.
i tried a different model that i have printed many of with the same strange weak result.
i also tried CRX_NoFil_DW7.4.4 but i had the same weak result.
the gcode files are the same ones i have printed many of these parts from.
after much hassle i managed to get the stock firmware back on the machine but the screen is messed up because the stock screen firmware seems to be missing stuff but i got it working and did the print again and it printed fine and it was the expected 19grams and was strong.
my machine has no mods and is the stock noisy mainboard so is there something i am doing wrong here or is it an issue with the firmware?