InventoCasa / ha-advanced-blueprints

Advanced Blueprints combined with pyscript for extra useful automations
139 stars 33 forks source link

Separating the switch-on/switch-off interval of the device (Wallbox) #74

Open aemkei123 opened 3 weeks ago

aemkei123 commented 3 weeks ago

Ein-/Ausschaltintervall des Geräts

Ist es möglich, dass man den Einschaltintervall und Ausschaltintervall separieren kann?

Ein Beispiel:

in der aktuellen Version: Ein-/Ausschaltintervall des Geräts: 5min

Sonne scheint, 3kW Einspeisung, Ladevorgang startet. Nach paar Minuten erscheint eine Wolke für 6 min, Einspeisung sinkt auf 100W, Ladevorgang stoppt. Nun wird wieder 5 min gewartet obwohl die Wolke schon wieder weg ist.

Wenn nun die Wartezeit für das Ausschalten separat eingestellt werden kann, als Beispiel 10 min. Wird nicht gleich der Ladevorgang gestoppt. Was der Wallbox auch zu gute kommen würde.

Switch-on/switch-off interval of the device

Is it possible to separate the switch-on interval and switch-off interval?

For example:

in the current version: switch-on/switch-off interval of the device: 5min

Sun is shining, 3kW feed-in, charging process starts. After a few minutes, a cloud appears for 6 minutes, feed-in drops to 100W, charging stops. Now the device waits another 5 minutes although the cloud has already disappeared.

If the waiting time for switching off can now be set separately, for example 10 minutes, the charging process is not stopped immediately. Which would also benefit the wallbox.

ThorAlex87 commented 2 days ago

I support this, being able to have a longer off time on my heat pump would be very useful to avoid too much short-cycling.