search

Inversion-NL / eu.benext

5 stars 13 forks source link

BeNext Tag Reader 500 issue #23

Open FrankBakermans opened 6 years ago

FrankBakermans commented 6 years ago

Hi,

I recently bought a BeNext Tag Reader 500 to use in combination with the Homey. Unfortunately one out of three arm/disarm events fail with presenting a rfid tag. First I thought it was the distance between the Tag Reader and the Homey, but even when the Tag Reader is next to the Homey I get the same behaviour.

When I look at the Z-Wave network on the https://developer.athom.com page, I see that the Tag Reader is creating a lot of "Tx Errors", even when the Tag reader is not actively used (idle) (see print screen)

z-wave developer

I have the Tag Reader in Mode 1, Gateway mode and Gateway confirmation is enabled

I hope you can help me,

Thanks, Frank Bakermans

DieterKoblenz commented 6 years ago

Same problem here now. Lots of Tx Errors, it is flagged as NoAck a lot too..

jeesnl commented 5 years ago

Same problem here, what to do?

DieterKoblenz commented 5 years ago

I never got this to work reliable with Homey. Since my comment it has been running icw Domoticz and the http app with not a single fail.

jeesnl commented 5 years ago

DieterKoblenz, thanks for the quick answer. I will send the device back to the supplier and look for alternative solution on Homey as i don't want an extra controller.

Inversion-NL commented 5 years ago

Do you still have the issue?

DieterKoblenz commented 5 years ago

Haven't tested, since the app is/wasn't compatible with the new Homey version.