search

InvisibleManVPN / InvisibleMan-XRayClient

A client for xray core
MIT License
424 stars 52 forks source link

Windows 10 connection bug. "Start/Stop" buttons. #79

Open Vlad0sMiner opened 1 year ago

Vlad0sMiner commented 1 year ago

Hello. Please fix the bug when in Windows 10 you have to press "Run/Stop" several times to make the VPN connection work (TUN/UDP mode). If I press "Start" once, it says that it is connected, but the IP address does not change.

InvisibleManVPN commented 1 year ago

Hi @Vlad0sMiner! Thanks for your reporting issue. We'll investigate it.

But can you do the following steps and give us feedback? In TUN mode, click RUN and then go to this location: Control Panel > Network and Internet > Network and Sharing Center In the View your activity network section, check whether you have InvisibleMan-XRay network connection or not.

image

Vlad0sMiner commented 1 year ago

Upon the first press of RUN after launching the application, it initiates a connection, but nothing happens, and the internet operates without VPN (screenshots 1 and 2). Then, I press STOP and RUN again, it requests to run as administrator, and after that, in about 10 seconds, the connection is made, and the VPN is functional. If I disconnect again by pressing STOP and press RUN after a minute, the same thing will happen as the first time; the VPN will not start, and I will have to repeat the manipulations. I have tested this on a laptop with Windows 10 and on a computer with Windows 10. The same problem occurs in all cases.

1: 1 2: 2 3: 3

InvisibleManVPN commented 1 year ago

@Vlad0sMiner OK, Thanks for the description in detail. We'll check it.

GregFedy commented 11 months ago

Upon the first press of RUN after launching the application, it initiates a connection, but nothing happens, and the internet operates without VPN (screenshots 1 and 2). Then, I press STOP and RUN again, it requests to run as administrator, and after that, in about 10 seconds, the connection is made, and the VPN is functional. If I disconnect again by pressing STOP and press RUN after a minute, the same thing will happen as the first time; the VPN will not start, and I will have to repeat the manipulations. I have tested this on a laptop with Windows 10 and on a computer with Windows 10. The same problem occurs in all cases.

I have the same problem. It needs to be activated twice every time before the VPN starts working.

lordtgm commented 7 months ago

manually setting the network metric fixes the problem for me. maybe the app should handle the network metric? (its what defines the priority of network adapters)

Zalupenok commented 3 months ago

При первом нажатии кнопки RUN после запуска приложения оно инициирует подключение, но ничего не происходит, и интернет работает без VPN (скриншоты 1 и 2). Затем я нажимаю "СТОП" и запускаю снова, он запрашивает запуск от имени администратора, и после этого, примерно через 10 секунд, соединение установлено, и VPN работает. Если я снова отключусь, нажав STOP, и через минуту нажму RUN, произойдет то же самое, что и в первый раз; VPN не запустится, и мне придется повторить манипуляции. Я тестировал это на ноутбуке с Windows 10 и на компьютере с Windows 10. Во всех случаях возникает одна и та же проблема.

I have the same problem. Has anyone found a way to fix it?

InvisibleManVPN commented 3 months ago

Hello guys! Would you please try the new version (v2.1.2) of Invisible Man XRay and give me feedback the problem still exists or not?

Thank you!

motopila commented 1 month ago

Hello guys! Would you please try the new version (v2.1.2) of Invisible Man XRay and give me feedback the problem still exists or not?

Thank you!

Hi. The problem remains in the new (latest) version!