search

JGCRI / gcam-core

GCAM -- The Global Change Analysis Model
http://jgcri.github.io/gcam-doc/
Other
292 stars 171 forks source link

1.5℃ and 2.0℃ scenarios with GCAM5.2 #149

Open github-wbx opened 3 years ago

github-wbx commented 3 years ago

Hi! I try to simulate electricity generation under the 1.5℃ and 2.0℃ scenarios but failed. The configuration files I used as follows, is that correct? configuration.txt batch_SSP_SPA1_1926.txt

kvcalvin commented 3 years ago

It is difficult for us to diagnose your problem with the information available in this issue. What sort of error did you get? Alternatively, we suggest using the configuration_ssp.xml or configuration_policy.xml as a starting point depending on whether you want SSP-based 1.5C and 2C scenarios or not.

github-wbx commented 3 years ago

Sorry for didn't address the problem. I tried to simulate electricity generation under the 1.5℃ and 2.0℃ scenarios but failed. The configuration file used configuration_ssp.xml, the batch file used batch_SSP_SPA1.xml (just target_2p6_spa1 and target_1p9_spa1).

The following was part of the main_log of configuration with batch_SSP_SPA1. 01 02 03 main_log.txt

kvcalvin commented 3 years ago

Thank you. That information is helpful. The series of messages that start "Deleting node..." can be ignored. The model is just updating inputs as it reads in more xml files. For the solver error, I have an additional question. Which version of GCAM are you using?

github-wbx commented 3 years ago

GCAM 5.2

debibooo commented 3 years ago

I use GCAM 5.4 and have the same trouble. Did you solve your problem? Is it necessary to clear the ' runner-set name' content in the batch_SSP_SPA4 file after setting "find-path" to 1?

pramishp commented 1 year ago

I use GCAM 5.4 and have the same trouble. Did you solve your problem? Is it necessary to clear the ' runner-set name' content in the batch_SSP_SPA4 file after setting "find-path" to 1?

I am facing the same problem.