search

JGMaker3dofficial / artistd

GNU General Public License v3.0
25 stars 15 forks source link

[BUG] power outage setting do not let print to start. #46

Closed jpkuntz90 closed 3 years ago

jpkuntz90 commented 3 years ago

Release version 2021.4-Beta

Printing do not start if Configuration > Power outage setting is on.

Screen show directly :

Power Outage : PRINTER HALTED Please Reset"

TwinkieXLII commented 3 years ago

Did you have an SD Card mounted at the time you started the print?

jpkuntz90 commented 3 years ago

Yes, i was ready to print.

mikejr83 commented 3 years ago

Thank you @jpkuntz90. May I just state the steps you ran through so that we know how to test this once we have a fix ready?

  1. Slice model and save gcode to SD card
  2. Insert SD card into printer
  3. Check that power out resume is enabled in configuration
  4. Go to "Print from media" menu
  5. Select model
  6. Start print
  7. Error occurs as noted

I'll test this flow when my printer frees up from its next print.

jpflouret commented 3 years ago

I think @mikejr83 tagged me incorrectly when the questions were meant for @jpkuntz90.

mikejr83 commented 3 years ago

Crap man sorry about that!

ale624 commented 3 years ago

Hi,

I have just had this exact issue after updating to this latest firmware version. The workflow is exactly as described above @mikejr83

github-actions[bot] commented 3 years ago

This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.

TwinkieXLII commented 3 years ago

I've got a fix that will be in 2021.3

On Tue, Apr 27, 2021, 9:27 PM github-actions[bot] @.***> wrote:

This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/JGMaker3dofficial/artistd/issues/46#issuecomment-828093394, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADG7AEOI2XKHERZFNSI4KLTK5XAPANCNFSM4ZAAWUXQ .

ale624 commented 3 years ago

I've got a fix that will be in 2021.3 … On Tue, Apr 27, 2021, 9:27 PM github-actions[bot] @.***> wrote: This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#46 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADG7AEOI2XKHERZFNSI4KLTK5XAPANCNFSM4ZAAWUXQ .

Hey there. Did you mean 2021.5??

TwinkieXLII commented 3 years ago

Yes 2021.5

On Mon, May 3, 2021, 9:58 PM ale624 @.***> wrote:

I've got a fix that will be in 2021.3 … <#m-799664276290536472> On Tue, Apr 27, 2021, 9:27 PM github-actions[bot] @.***> wrote: This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days. — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#46 (comment) https://github.com/JGMaker3dofficial/artistd/issues/46#issuecomment-828093394>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADG7AEOI2XKHERZFNSI4KLTK5XAPANCNFSM4ZAAWUXQ .

Hey there. Did you mean 2021.5??

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/JGMaker3dofficial/artistd/issues/46#issuecomment-831655579, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADG7AEHANNBF7JEO2WKL2LTL5PF5ANCNFSM4ZAAWUXQ .