prepare release

[jorpppp]

In this issue, we'll update documentation for a new release. Version number pending.

• [x] Update home page
• [X] Update version statements in ado files (done in https://github.com/JMSLab/xtevent/commit/6408fdc18b5af9899a83af33a012304a1f85f459)
• [X] Check examples in home page (note changes to cohort and control_cohort syntax in #179 (done in https://github.com/JMSLab/xtevent/commit/3553273802d820e9dcf098eb24e2ac1567167e31)
• [x] Check examples in test file and run (done in https://github.com/JMSLab/xtevent/commit/9c71a620eb8d1bfab9d67b6a43c951d7735044a2)
• [x] Check examples in help files and run
• [x] Check that help files display properly
• [x] Update acknowledgments (done in https://github.com/JMSLab/xtevent/commit/c969672e99215625f0d7a5d5c9b26d07eacc3a9b)
• [x] Update install.txt and release.txt (done in https://github.com/JMSLab/xtevent/commit/2a843bd9214e51a3a517bf83cd555cb8a883db6d)
• [X] Update version dependencies in dependency.do (done in https://github.com/JMSLab/xtevent/commit/f1e12ed827283f4bb71230f597bb9cb83e1da559)

[jorpppp]

Dear Pan.

Thank you for your email. This was a previous issue in xtevent that was fixed in issue #186

Error when normalizing 0 coefficient · Issue #186 · JMSLab/xtevent (github.com) https://github.com/JMSLab/xtevent/issues/186

Can you please install the latest development version of xtevent and let us know if the problem persists?

Thank you,

JPP

To install the last version in this repository, use the github command: https://github.com/JMSLab/xtevent#to-install-the-last-version-in-this-repository-use-the-github-command

First, install the github command:

net install github, from("https://haghish.github.io/github/")

Then execute:

cap github uninstall xtevent

github install JMSLab/xtevent

On Thu, Jun 20, 2024 at 3:35 AM pxygithub2024 @.***> wrote:

Dear Jorge Eduardo Perez Perez,

I hope this message finds you well.

My name is Pan xy, and I am currently a Ph.D. student at Tsinghua University. I am encountering an issue when setting norm() to the first stage, norm(0). At the end of the process, I receive an r(198) error indicating that "_k_eq_m0 not found." Could you please advise me on how to address this situation?

Thank you very much for your help.

Best regards, Pan xy

— Reply to this email directly, view it on GitHub https://github.com/JMSLab/xtevent/issues/184#issuecomment-2180243416, or unsubscribe https://github.com/notifications/unsubscribe-auth/AEBUYUDG4VC5YTDHJZEDCNDZIKO6BAVCNFSM6AAAAABGTU34DWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBQGI2DGNBRGY . You are receiving this because you authored the thread.Message ID: @.***>

[pxygithub2024]

Dear Mr. Perez. I followed the steps you mentioned and the error displayed is as follows:

. net install xtevent, from(" https://raw.githubusercontent.com/JMSLab/xtevent/master") checking xtevent consistency and verifying not already installed... could not copy https://raw.githubusercontent.com/JMSLab/xtevent/master/. /xtevent/_eventivstatic.ado (no action taken) I download the files from your github,and cover the old files in my personal directory, But still don't work.Maybe I am doing something wrong?

Thank you very much for your help.

Pan xy

Jorge Eduardo Perez Perez @.***> 于2024年6月25日周二 05:05写道：

Dear Pan.

Thank you for your email. This was a previous issue in xtevent that was fixed in issue #186

Error when normalizing 0 coefficient · Issue #186 · JMSLab/xtevent (github.com) https://github.com/JMSLab/xtevent/issues/186

Can you please install the latest development version of xtevent and let us know if the problem persists?

Thank you,

JPP

To install the last version in this repository, use the github command: < https://github.com/JMSLab/xtevent#to-install-the-last-version-in-this-repository-use-the-github-command>

First, install the github command:

net install github, from("https://haghish.github.io/github/")

Then execute:

cap github uninstall xtevent

github install JMSLab/xtevent

On Thu, Jun 20, 2024 at 3:35 AM pxygithub2024 @.***> wrote:

Dear Jorge Eduardo Perez Perez,

I hope this message finds you well.

My name is Pan xy, and I am currently a Ph.D. student at Tsinghua University. I am encountering an issue when setting norm() to the first stage, norm(0). At the end of the process, I receive an r(198) error indicating that "_k_eq_m0 not found." Could you please advise me on how to address this situation?

Thank you very much for your help.

Best regards, Pan xy

— Reply to this email directly, view it on GitHub https://github.com/JMSLab/xtevent/issues/184#issuecomment-2180243416, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBUYUDG4VC5YTDHJZEDCNDZIKO6BAVCNFSM6AAAAABGTU34DWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBQGI2DGNBRGY>

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/JMSLab/xtevent/issues/184#issuecomment-2187400471, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHLZKBRI6VK37LK6FVYGIWTZJCCZVAVCNFSM6AAAAABGTU34DWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBXGQYDANBXGE . You are receiving this because you commented.Message ID: @.***>

[pxygithub2024]

Dear Mr. Perez. I've solved the problem by following the steps you mentioned, it looks like there should have been a problem with the network before, and I already had to add the ",replace" option after the command. Thank you very much for your help! Pan xy

xingyu pan @.***> 于2024年6月27日周四 23:55写道：

Dear Mr. Perez. I followed the steps you mentioned and the error displayed is as follows:

. net install xtevent, from(" https://raw.githubusercontent.com/JMSLab/xtevent/master") checking xtevent consistency and verifying not already installed... could not copy https://raw.githubusercontent.com/JMSLab/xtevent/master/. /xtevent/_eventivstatic.ado (no action taken) I download the files from your github,and cover the old files in my personal directory, But still don't work.Maybe I am doing something wrong?

Thank you very much for your help.

Pan xy

Jorge Eduardo Perez Perez @.***> 于2024年6月25日周二 05:05写道：

Dear Pan.

Thank you for your email. This was a previous issue in xtevent that was fixed in issue #186

Error when normalizing 0 coefficient · Issue #186 · JMSLab/xtevent (github.com) https://github.com/JMSLab/xtevent/issues/186

Can you please install the latest development version of xtevent and let us know if the problem persists?

Thank you,

JPP

To install the last version in this repository, use the github command: < https://github.com/JMSLab/xtevent#to-install-the-last-version-in-this-repository-use-the-github-command>

First, install the github command:

net install github, from("https://haghish.github.io/github/")

Then execute:

cap github uninstall xtevent

github install JMSLab/xtevent

On Thu, Jun 20, 2024 at 3:35 AM pxygithub2024 @.***> wrote:

Dear Jorge Eduardo Perez Perez,

I hope this message finds you well.

My name is Pan xy, and I am currently a Ph.D. student at Tsinghua University. I am encountering an issue when setting norm() to the first stage, norm(0). At the end of the process, I receive an r(198) error indicating that "_k_eq_m0 not found." Could you please advise me on how to address this situation?

Thank you very much for your help.

Best regards, Pan xy

— Reply to this email directly, view it on GitHub https://github.com/JMSLab/xtevent/issues/184#issuecomment-2180243416,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AEBUYUDG4VC5YTDHJZEDCNDZIKO6BAVCNFSM6AAAAABGTU34DWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBQGI2DGNBRGY>

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/JMSLab/xtevent/issues/184#issuecomment-2187400471, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHLZKBRI6VK37LK6FVYGIWTZJCCZVAVCNFSM6AAAAABGTU34DWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCOBXGQYDANBXGE . You are receiving this because you commented.Message ID: @.***>

[jorpppp]

Per SemVer the new version is 3.1.0

[jorpppp]

Summary: In this issue we updated the home page and the repository for the 3.1.0 release.

Thread continues in #224