search

Jalle19 / satip-axe

A maintained fork of perexg/satip-axe, a firmware with minisatip for Inverto IDL-400s/Grundig GSS.BOX/Telestar Digibit R1
54 stars 11 forks source link

minisatip isnt disoverable in tvheadend #92

Open PANiCnz opened 2 weeks ago

PANiCnz commented 2 weeks ago

Has anyone else had a problem where the minisatip server isn't discoverable in tvheadend?

The R1 successfully boots and the OSCAM web interface is accessible.

Using the stock /etc/sysconfig/config

Jalle19 commented 2 weeks ago

Should work just fine. Is it on the same network as tvheadend?

PANiCnz commented 1 week ago

Same network. Not change except moving from Build 15 to Build 26. Remove the USB key with Build 26 on it, reverted back to Build 15 and it was detected within a few minutes.

Jalle19 commented 1 week ago

The log that generates the UUID has changed, so when you upgrade to Build 26 it won't show up as the same server but as a new one. Are you sure it doesn't show up at all? Can you post the command-line used to run minisatip (can be seen in the footer of the web interface)?

Jalle19 commented 1 week ago

Also if you've upgraded from a very old build you will have to update your configuration file to match, otherwise minisatip will most likely run with default settings only. See https://github.com/Jalle19/satip-axe/issues/91.

PANiCnz commented 1 week ago

The web interface isn't accessible after first boot, I assume that means minisatip hasn't started after boot?

Jalle19 commented 1 week ago

Please post your configuration

PANiCnz commented 1 week ago

Configuration is stock. Does it need to be updated?

Jalle19 commented 1 week ago

Yes, but since I don't remember what the stock configuration from 7 years ago looks like I need you to post it.