search

JaredC01 / Galileo2

GNU General Public License v3.0
469 stars 62 forks source link

Cablechain hitting extruder motor #48

Open Exeu opened 7 months ago

Exeu commented 7 months ago

Hi there!

I recently upgraded to an Galileo 2 extruder on a ldo voron 2.4.

Since then I lost 5-7 mm on x since the cable chains are hitting the extruder motor preventing it from moving further.

My guess is that the cable chains are too big? Is there any recommended cablechain setup?

Thanks for an answer ☺️ 20240404_190403.jpg

stramius commented 7 months ago

Hi,

Unfortunately, I am facing the same issue.

Is there any Workaround or mod for this?

Exeu commented 7 months ago

@stramius what i did now is to redo the cable chain on x, with the hope that on a slightly different position it will work. It got better now but it is still hitting the motor, but overall i were able to reduce it to 1-3mm max axis loss. To solve this i guess the only way is to set the motor 1-2 higher or try to get "slimmer" XY Joints (they are causing the chain to move up at that position)

stramius commented 7 months ago

@Exeu : Thank you so much for your Input. I have changed the cable chain position and now it is slightly improved. Anyway, it seems as a long term solution I need to switch to a Canbus in oder to get rid of the cable chains.