Cannot ARM/Disarm - Githubissues

reylas commented 6 years ago

Whenever I try to arm or disarm the system with the concord232-client a strange thing keeps happening. I can run the server in debug mode, and I can see it try to arm, but then a message returns that implies it is waiting for the code. the code was sent using the --master XXXX command line option. On the display of the keypad, it is asking for the arm code.

Is there something I am missing? It is like it is not sending the arm code.

tcarcur commented 6 years ago

I'm having the same issue. When sending the arm command the debug shows the panel is displaying "Enter Code" and then the panel times out. Sending the arm command with --master XXXX doesn't seem to make a difference.

tlyoung99 commented 5 years ago

I'm having this same issue. I can arm at the keypad and then disarm via concord232-client. I cannot arm via concord232-client. That includes arm-stay, arm-away and all of the various options (silent, instant, etc.) Each time I issue one of these commands, my control panel says "Enter Code". I've tried installer code, master code, and user code in the command. All follow the same path. Any ideas? I see that this has been an issue for over a year. Just trying to see if anyone has found a workaround.

silfa718 commented 5 years ago

I am having the same issue as well and haven't found a solution.

brianewman commented 5 years ago

I resolved this by enabling Quick Arm (on partition1) using the System Programming menu from my touchpad.

silfa718 commented 5 years ago

Can you share how to do this

tlyoung99 commented 5 years ago

This solved my problem as well. To enable Quick Arm: -8 + [Installer Code] -00 for system programming -0011 is the shortcut to get to quick arm -# to enter edit mode -1 to switch value from off to on -* until you see "System Programming" -Up once to get to Exit -#

silfa718 commented 5 years ago

How do I find my installer code