search

JetsonHacksNano / CSI-Camera

Simple example of using a CSI-Camera (like the Raspberry Pi Version 2 camera) with the NVIDIA Jetson Developer Kit
Other
817 stars 287 forks source link

face_detect.py : Jetson reboots while executing #32

Closed cristinaluna closed 1 year ago

cristinaluna commented 3 years ago

Hi!

I'm trying to execute face_detect.py on my jetson nano 2Gb (jp441), camera IMX219-160

It freezes whithout prompting the camera screen, in the console it says CONSUMER: Producer has connected; continuing and then reboots the platform

Thank you!

Gyansai commented 3 years ago

me too facing the same error 

CONSUMER: Waiting until producer is connected...
GST_ARGUS: Available Sensor modes :
GST_ARGUS: 3264 x 2464 FR = 21.000000 fps Duration = 47619048 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: 3264 x 1848 FR = 28.000001 fps Duration = 35714284 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: 1920 x 1080 FR = 29.999999 fps Duration = 33333334 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: 1640 x 1232 FR = 29.999999 fps Duration = 33333334 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: 1280 x 720 FR = 59.999999 fps Duration = 16666667 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: 1280 x 720 FR = 120.000005 fps Duration = 8333333 ; Analog Gain range min 1.000000, max 10.625000; Exposure Range min 13000, max 683709000;

GST_ARGUS: Running with following settings:
   Camera index = 0 
   Camera mode  = 3 
   Output Stream W = 1640 H = 1232 
   seconds to Run    = 0 
   Frame Rate = 29.999999 
GST_ARGUS: Setup Complete, Starting captures for 0 seconds
GST_ARGUS: Starting repeat capture requests.
CONSUMER: Producer has connected; continuing.

jetpack version 4.4, camera - IMX219-77IR , OpenCV - 4.1.1 urgency -very urgent

cristinaluna commented 1 year ago

I'm going to close this issue due to inactivity.

It could be a problem with the camera! but needs to be investigated