Closed xtherk closed 1 year ago
If your aimbot works fine but you feel the configuration is not good enough, for example what configuration should the widow maker use.
I don't have so much time to adjust the parameters for you, please carefully follow the description of each parameter in overwatcheat.cfg and make changes slowly until you are satisfied.
But I can give some suggestions as follows:
You can try to reduce the sensitivity
of the bot, the smaller the sensitivity value, the faster the tracking (flick) speed.
Allows you to move the crosshair to the target faster
Reduce sleep time
Let aimbot identify targets faster
[flick mode] Lower the value of flick_pause_duration, between 20-100
These can improve the hit rate.
Please adjust other parameters according to the configuration description.
window_title_search=XXXXX
XXXXX needs to be changed to the title of your game window. The game window title may also be different for different languages.
window_title_search=XXXXX XXXXX needs to be changed to the title of your game window. The game window title may also be different for different languages.
For FFmpeg, specifying the "desktop" can capture the desktop. For the jire version, the desktop parameter is not supported. my version is support
Use built-in GDI screengrabber You can also use gdigrab as input device to grab video from the Windows screen. To capture all your displays as one big contiguous display:
ffmpeg -f gdigrab -framerate 30 -i desktop output.mkv
@xtherk hi ,I'm doing it,,,scaling 150% win .but,,Broken Way of Working 我想让他在150%缩放下工作233,,我该怎么做 (‾◡◝)
hi i am past the build step, now im running the Start Overwatch 4.0.0 and in game with magenta set, i am getting this error any idea how to get it to work?
@xtherk hi ,I'm doing it,,,scaling 150% win .but,,Broken Way of Working 我想让他在150%缩放下工作233,,我该怎么做 (‾◡◝)
暂时只能更改为100%来让它工作
hi i am past the build step, now im running the Start Overwatch 4.0.0 and in game with magenta set, i am getting this error any idea how to get it to work?
This is not error, see what I said above
I use the default configuration and aim at either of these two targets and it will automatically move the center of aim to a position in between the two targets. Which setting should I adjust to solve this problem
i have the ffmpeg downloaded i just dont know how to use it to get it working still have the same code as abve :( im very new to this, i watched a video to install ffmpeg but im not sure how to get it to work
i have the ffmpeg downloaded i just dont know how to use it to get it working still have the same code as abve :( im very new to this, i watched a video to install ffmpeg but im not sure how to get it to work
If you are playing in full screen, change the configuration: window_title_search=desktop
If you are playing a full-screen windowed game, change the configuration: window_title_search=XXX XXX for the title of your game window
The image you posted has no error message and is displayed normally.
@senoxe you don't need to download ffmpeg
any chance i can speak to someone in discord or share screen for a few minutes? would truly appreciate it senoxe#7942
I use the default configuration and aim at either of these two targets and it will automatically move the center of aim to a position in between the two targets. Which setting should I adjust to solve this problem
Reading will solve your problem https://github.com/Jire/Overwatcheat/issues/94
@xtherk i got it working!! :) i just have an issue where it pulls up after it auto aims to the target the crosshair flys upward! can you help me with that?
@xtherk its due to the hitmarkers actually
我使用默认配置并瞄准这两个目标中的任何一个,它会自动将瞄准中心移动到两个目标之间的位置。我应该调整哪个设置来解决此问题
Reading will solve your problem #94
Thanks
@xtherk the only problem i have is snap way too strong anyway to fix?
@xtherk the only problem i have is snap way too strong anyway to fix?
Increase sleep time and sensitivity
I opened this issue, not for you to ask me questions, or for me to solve problems for you. I have no time or obligation to solve problems for you.
I find that people always ask their own questions without checking whether the problems mentioned by others are solved, some questions I have answered or solved but still ask the same questions, I am tired.
sorry to bother, thank you for the help! i searched i couldnt find anything related to it in the 118
@senoxe sorry i didn't mean you
@xtherk the only problem i have is snap way too strong anyway to fix?
You just need to make adjustments according to the description of each parameter in overwatcheat.cfg.
Hope it can help you @senoxe
@xtherk oh ok, ya im testing them i just dont know whats the maximum values for example "the base float to use to calculate sleep time multiplier. the higher this is, the more smooth and less sticky the aiming will be" i have mine set to 1000.0 i dont know if the values go that high and maybe thats why i dont see a difference?
Just keep it at 1 aim_duration_multiplier_base=1.0
What needs to be changed is aim_duration_millis
(unit millis)
Many parameters are meaningless and confusing
kk i think i messed stuff up switching things around so i redownloaded the original .cfg and feels better now ill slowly adjust from here one by one not multiple ty
just trying to make it look as realistic as possible so no manual bans
just trying to make it look as realistic as possible so no manual bans
yeah, just need to be a qualified actor
To adjust the parameters, you must first figure out what the parameters you are adjusting are used for. You only need to adjust them one by one, not many at a time. For all the viewers watching this thread
with the settings they start you off you aint foolin anyone XD its super ragey
@xtherk if you want a smaller region for it to snap would you change box_width=256 box_height=256 lower?
@xtherk if you want a smaller region for it to snap would you change box_width=256 box_height=256 lower?
yep
@xtherk last question also ty for help, what values would you set for maximum smoothness for these values aim_duration_millis= aim_duration_multiplier_base= aim_duration_multiplier_max=
im having trouble adjusting them and seeing any noticeable difference
@senoxe
You don't need care about these two parameters aim_duration_multiplier_base
and aim_duration_multiplier_max
, just need only set to 1.
You only need to set this one parameter. aim_duration_millis
I don't really know how to explain these 2 parameters to you, it really doesn't matter to you
thank you for your help! <3
AL lib: (EE) ALCwasapiPlayback_open: Device init failed: 0x80070490
im getting this
I applied the solution you suggested to the situation of being stuck between two targets. I get such an error when I open builder for rebuild. Can you help?
and;
After killing a lone target with a spray, the cross instantly slides up. What could be the reason for this?
@xtherk xtherk, for anyone in the future that is asking for any legit settings i want to provide you with what someone from the overwatcheat discord provided me with. giving credit where credit is due. @AthenoI'lea on discord. these are pretty well made settings to consider for legitimate play so you are not manually banned. Send these to anyone who asks you if you like. They are a very solid foundation!
millis = 1.5 multiplier_base=4 (or 3 if you want to a little stronger smooth) multiplier_max= 1 aim_max_move = 50 jiter = 10 aim_offset_y= 0.75 (for head) or 0.90 (body) fps= 300 (trully recommend you running at 300 or 200 fps, anything else looks shit) (for 1920x1080p resolution only) box_width=64 / box_height=96 if you want to more legit feeling and less fake positives box_width=128 andbox_height=156 if you just want to hold mouse button and kill without even aim correctly idk if sensitivity matter when calcs multiplier but im using 10.0 btw
@senoxe thank you very much
This problem has been bothering me all day, can anyone help me? Thanks!
I applied the solution you suggested to the situation of being stuck between two targets. I get such an error when I open builder for rebuild. Can you help?
and;
After killing a lone target with a spray, the cross instantly slides up. What could be the reason for this?
Can u help me? @xtherk
I applied the solution you suggested to the situation of being stuck between two targets. I get such an error when I open builder for rebuild. Can you help? and; After killing a lone target with a spray, the cross instantly slides up. What could be the reason for this?
Can u help me? @xtherk
Please post a screenshot of your modified code
@Lee890917 Please modify window_title_search=desktop
, and modify the game to full screen, then try again
I applied the solution you suggested to the situation of being stuck between two targets. I get such an error when I open builder for rebuild. Can you help? and; After killing a lone target with a spray, the cross instantly slides up. What could be the reason for this?
Can u help me? @xtherk
Please post a screenshot of your modified code
I applied the change in AimFrameHandler to try the solution in post 94 and when I tried to open "build" again I got the attached error. My settings in the main file were just changed with what @senoxe suggested. @xtherk
I applied the solution you suggested to the situation of being stuck between two targets. I get such an error when I open builder for rebuild. Can you help? and; After killing a lone target with a spray, the cross instantly slides up. What could be the reason for this?
Can u help me? @xtherk
Please post a screenshot of your modified code
I applied the change in AimFrameHandler to try the solution in post 94 and when I tried to open "build" again I got the attached error. My settings in the main file were just changed with what @senoxe suggested. @xtherk
You did not replace it as I said, please add it according to the annotations in the picture
I did a rebuild, but this time the cross moves unrelated to the target. Goes far to the left of the target instead. I'm using a 2K monitor. I will be glad if you answer accordingly :( @xtherk
I did a rebuild, but this time the cross moves unrelated to the target. Goes far to the left of the target instead. I'm using a 2K monitor. I will be glad if you answer accordingly :( @xtherk
Oh, you made a mistake, please restore the file and follow this link to modify it again
@Spontaneously Restore to the original file, please modify it carefully
I summed up some problems you can check.
If your Aimbot is not working:
Check if the InterceptionDrive is installed and reboot.
Check if magenta is set for enemies in game.
If you use the version of Overwatcheat I released, it's recommended to use full screen with
window_title_search=desktop
, using windowed may capture a black screen and cause aimbot to not work.Please check each step carefully, if the above steps are completed, the aimbot is likely to work.