Closed GoogleCodeExporter closed 8 years ago
You need to check "Monitor Inverters" to activate the CC Meter "Inverter
Manager". This inverter manager copies data from the meter tables into the
inverter tables in the database simulating the function of a "Real" inverter
manager.
You may want to increase "Live Upload Days" to 14 to load the past history to
pvoutput. Set it back to 1 or 2 when all is stable.
Loading several days of history will encounter the pvoutput transaction limits.
Just let PVBC keep running. It will eventually settle down.
Dennis M-F
Original comment by DennisMackayFisher
on 15 Jul 2011 at 6:56
This first tab under basic setup has "Monitor Inverters" already selected and
the second tab Inverter Managers has "Current Cost" already selected as the
inverter type. Current Cost Meters tab already has yield selected on appliance
1.
To enforce Current Cost Meter as the inverter type I have stopped services,
unticked monitor inverters, saved settings, ticked moniter inverters, saved
settings to try to make sure it has been written with current cost as the
inverter type.
I will see what happens but beleive the setup is ok. I will check the status on
the next day.
Original comment by GWMSo...@gmail.com
on 15 Jul 2011 at 1:29
I've had a quick look (before the pvbeancounter can upload and change anything)
and it appears the consumption and yield are being added together at the moment
on PVOutput. But as I indicated I will check tomorrow to see if any output has
changed.
Original comment by GWMSo...@gmail.com
on 15 Jul 2011 at 1:44
Please upload the MS Access database. I will try to replicate the problem.
Dennis M-F
Original comment by DennisMackayFisher
on 16 Jul 2011 at 12:21
I also have two meters. I though there might be an issue with the ID on one?? I
have swapped them around after a sufficient upload timeframe to see if there
was any difference but still no green data.
I've attached the database Thanks Dennis.
Original comment by GWMSo...@gmail.com
on 16 Jul 2011 at 12:50
The main problem is incorrect time entries on the suspend / resume panel.
Inverter start and stop times should be entered as
06:00:00
22:00:00
Make this change and data for today will load.
I am still investigating why it is not loading past inverter history.
Dennis M-F
Original comment by DennisMackayFisher
on 16 Jul 2011 at 2:26
I tried to just select the end of the text and remove the extra zero's this
would not work so I left it when I set it up originally.
Now when trying I removed all characters and typed in 6:00 and 22:00 and it
filled in correctly.
Original comment by GWMSo...@gmail.com
on 16 Jul 2011 at 2:36
Original comment by DennisMackayFisher
on 18 Jul 2011 at 10:09
Original issue reported on code.google.com by
GWMSo...@gmail.com
on 14 Jul 2011 at 9:27