Open JochiSt opened 2 years ago
Added 100nF at the position of D5 and D6.
Since this effects only channel 0, the results DAC sweep looks more smooth.
And the precision has also increased. Maybe further capacitors are needed to stabilise the measurement circuit.
I tested the OFM using two 100 Ohm resistors and a DAC sweep. (From the calibration, it is known, that 32 LSB DAC are about 1mA measurement current)
Channel 0
Channel 1
Overall it seems, that there is a bit to much noise for the low voltages (and currents). This needs further investigations, whether there is some room for improvements.