Calibration will not save

[GoogleCodeExporter]

You're probably tired of hearing from me but I found one last issue. When I 
calibrate the vJoy Device using joy.cpl, it keeps that calibration until the 
system reboots. After the reboot, the calibration is not correct anymore.

I know this is the third thing I've reported, but I still use this program 
quite a lot. There's just a few kinks I'd like to see fixed. Keep up the good 
work!

Original issue reported on code.google.com by kytechne...@gmail.com on 5 Feb 2014 at 6:48

[GoogleCodeExporter]

Unfortunately this application doesn't have any calibration settings associated 
with it. The vJoy Device is calibrated through that native Window joy.cpl 
utility.

I know I personally don't have an issue with calibration settings being lost on 
reboot so I'm curious what's going on. Are you possibly using a different Xbox 
Controller? Are you changing the port the Receiver is plugged into?

Not sure it'll help but try giving the latest Revision (r23) a shot. If 
anything there's some new features that are worth having imho.

Original comment by ksbarnes@skyag.net on 15 Feb 2014 at 7:23

[GoogleCodeExporter]

It's working now. It's not a problem anymore.

Original comment by kytechne...@gmail.com on 8 May 2014 at 10:34

• Changed state: Done