Chatpad and mouse mode work GREAT but controller does not work.

[GoogleCodeExporter]

Followed all directions, using a wireless 360 controller with chatpad the 
chatpad and mouse functionality work perfectly!  When I hold the key combo to 
disable mouse mode, I have no controller input for games.  I've tried 
calibrating the vJoy device but it doesn't see any input from the controller.  
I've made sure every other controller I have was disconnected but no go.  Tried 
removing and re-adding vJoy devices with different numbers but never could get 
the calibration to work.  Works great as a mouse/kb replacement but if I can't 
switch back to controller mode, it's not worth it.

What is the expected output? What do you see instead?
Mouse works but controller does not.  See no controller input on calibration 
tools or in vJoy monitor.

What version of the product are you using? On what operating system?
Latest; Windows 8.1 64-bit

Please provide any additional information below.
I'm using a wireless 360 controller with a 360 wireless dongle attached to my 
PC.  Worked fine as a controller before attempting to use 360chatpad driver.

Original issue reported on code.google.com by fortun...@gmail.com on 9 Jan 2015 at 11:16

[GoogleCodeExporter]

Thanks for your help; would love to have this work for my Steam PC. I'll be 
glad to donate if I can get this sorted out.

Original comment by fortun...@gmail.com on 9 Jan 2015 at 11:19

[GoogleCodeExporter]

Hey, this guy above here is having the exact issue that im having, though i 
cant switch back and forth between mouse mode and not, i have to change it in 
the config. also ive been trying to get xpadder to work with this also. 
it detects vjoy, everything else i dont think connects. its a shame, if i can 
get xpadder to pick up all the buttons the sticks and and whatnot this will be 
awesome. i know its prolly something simple. idk im kinda stumped about it.

Original comment by grant.da...@gmail.com on 10 Jan 2015 at 3:19

[GoogleCodeExporter]

Tried everything, just couldn't get it to work in non-mouse mode.  I'll wait 
for a response.

Original comment by fortun...@gmail.com on 11 Jan 2015 at 10:46

[GoogleCodeExporter]

I have a problem very like this. I use Windows 8.1 64-bit. But i cannot get my 
controller to give any input. The chatpad and mouse mode works fine, but when i 
try to calibrate the controller, i shows no input. When i try to use xpadder, 
it constantly gets input a number of buttons, even if the controller is off. 
And xpadder will not react on any button presses.

Original comment by Laq...@gmail.com on 16 Jan 2015 at 12:34

[GoogleCodeExporter]

^ Exact Same issue; also using Win8.1 64-bit.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 6:08

[GoogleCodeExporter]

Same boat here, win 8.1 amd64. Controller worked great before the driver 
installation. Afterward, the Chatpad functions wonderfully, and the mouse mode 
works too. But the controller mode has no input.

Original comment by wellthisisbabylon@gmail.com on 19 Jan 2015 at 6:12

[GoogleCodeExporter]

Found the reason for the bug. Not following the instructions. I had vjoy 2.0.5 
installed. It HAS to be 2.0.2, at least in my case.

Original comment by Laq...@gmail.com on 19 Jan 2015 at 5:18

[GoogleCodeExporter]

Would not have considered using an older rev.  I'll give it another try this 
week.  Thanks for the info.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 5:34

[GoogleCodeExporter]

Using vJoy 2.0.2 I am now getting input! This seems to be the last issue and 
not sure how to resolve it ... when calibrating the new vJoy device, the 
physical buttons are mapping to the wrong virtual button.  I recreated the vJoy 
device as instructed and still have the same issue.  The right analog gets 
mapped to Z Axis and Z Rotation and the L/R triggers get mapped to buttons 7 
and 8.  Suggestions on how to fix this?  I'm so close!

Original comment by fortun...@gmail.com on 19 Jan 2015 at 6:38

[GoogleCodeExporter]

Can confirm! Specifically the vjoy 2.0.2 011112 driver, and not the 2.0.2 
030114 driver. Works now! Had to reboot into "test mode" though to work. 
XPadder isn't detecting all the buttons though, and can't see the left stick at 
all. Gonna try fiddling with vjoy options.

Original comment by wellthisisbabylon@gmail.com on 19 Jan 2015 at 7:02

[GoogleCodeExporter]

Funny, 030114 worked just fine for me (supposing that's not the issue for my 
mis-mapped keys).  Is there a way to define which key matches which key/axis in 
the vJoy device vs just being randomly assigned?  I tried UJR but it griped 
about me using an older version of vJoy and promptly quit on me.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 7:03

[GoogleCodeExporter]

Not detecting any of my sticks, it seems. Nor the "Start" button.

Original comment by wellthisisbabylon@gmail.com on 19 Jan 2015 at 7:12

[GoogleCodeExporter]

The 360 chatpad software has to be running, be sure of that.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 7:13

[GoogleCodeExporter]

Yep, it's running. I can't actually connect the controller at all without it 
now, it seems.

Original comment by wellthisisbabylon@gmail.com on 19 Jan 2015 at 7:15

[GoogleCodeExporter]

The only key that didn't show for me I think was the start key as well.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 7:16

[GoogleCodeExporter]

I think it's going to come down to using a key remapper tool like UJR or 
similar to change which vJoy button/axis is represented by which physical 
button/trigger/stick.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 7:17

[GoogleCodeExporter]

4And you are not in mouse mode when you calibrate?

Original comment by Laq...@gmail.com on 19 Jan 2015 at 9:58

[GoogleCodeExporter]

Correct. I don't think you get any response from calibration when in mouse mode.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 10:01

[GoogleCodeExporter]

Has anyone here gotten it fully functioning yet, with both sticks, the chatpad, 
and all buttons working? If so, would you be up for posting screenshots of the 
settings in both vjoy and the Chatpad app? I'd like to compare, maybe I'm 
missing something here.

Original comment by wellthisisbabylon@gmail.com on 19 Jan 2015 at 10:27

[GoogleCodeExporter]

Nope. Messed around with this today but still not much luck 
(http://www.windowscentral.com/guide-use-xbox-one-controller-pc).  Something 
wrong with the vJoy device assigning the controller inputs to the wrong axes.  
Not sure how to correct that.  I did note if you make the controller 13 button 
that you get start & guide buttons to work.

Original comment by fortun...@gmail.com on 19 Jan 2015 at 11:33

[GoogleCodeExporter]

Tried building the controller all sorts of ways and even compared it to a wired 
controller I have connected.  Simply can't get the triggers to work on Z-axis 
and right analog on X/Y Rotation.  How do you fix this?  Been looking here: 
vjoystick.sourceforge.net/site/index.php/forum/4-Help/452-windows-8-1-can-t-rece
ive-buttons-axis

Original comment by fortun...@gmail.com on 19 Jan 2015 at 11:46

[GoogleCodeExporter]

I couldn't figure anything out either. In the meantime I guess I'm back to 
using my Nyko iType 2 controller until this can be worked out.

Original comment by wellthisisbabylon@gmail.com on 20 Jan 2015 at 6:06

[GoogleCodeExporter]

Sad day. Maybe the dev will respond and help us out?

Original comment by fortun...@gmail.com on 20 Jan 2015 at 10:40

[GoogleCodeExporter]

Mine is working perfectly. I just followed the guide, and i am using vjoy 2.0.2 
030114.

Original comment by Laq...@gmail.com on 22 Jan 2015 at 2:13

[GoogleCodeExporter]

I'm using the same version of vJoy but have not had success with the triggers 
and right analog stick mapping to the correct axes.  That's the only part I am 
stuck on.  Using a standard xbox 360 wireless controller.

Original comment by fortun...@gmail.com on 22 Jan 2015 at 8:19

[GoogleCodeExporter]

so, with some fiddling today, after reading your guyses success i managed to 
get it to put out some input. though xpadder gets both my sticks backwards, and 
it says theyre being pulled constantly

and the triggers dont wirk unless you put 'triggers as buttons' on the x360 
chatpad program. and even then it replaces the start and back button when you 
do that. but other then that the dpad works and the other buttons, 

i think i need to screw with vjoy some more

Original comment by grant.da...@gmail.com on 24 Jan 2015 at 3:36

[GoogleCodeExporter]

scratch that, i configured my controller better, ow i got my sticks and 
triggers working, seriously you gotta use the control panel way to configure 
the controller, its how i got shit working better. but now all i have is my x 
rotation is going nuts or some shit, basically my right stick is always 
pointing down.... i cant make it center, im getting closer though

Original comment by grant.da...@gmail.com on 24 Jan 2015 at 3:57

[GoogleCodeExporter]

How did you get your triggers to work? Mine still function as buttons, I think 
7 and 8. Can you elaborate? Thanks.

Original comment by fortun...@gmail.com on 24 Jan 2015 at 7:02

[GoogleCodeExporter]

Uninstalled libUSB & vJoy ... I need my wireless controller back.  I'll try 
again if dev ever responds.

Original comment by fortun...@gmail.com on 1 Feb 2015 at 5:33

[GoogleCodeExporter]

i have everything working except for the right joystick. :(

Original comment by c...@dorning.me on 26 Jun 2015 at 4:29

[GoogleCodeExporter]

i figured it out! using 2.0.2 in vJoy Config setup 2 POVs instead 1 like the 
directions say!

Works like a charm for me now in xpad. Everything, including the XBox button is 
mappable if you set it to 13 buttons.

Original comment by c...@dorning.me on 26 Jun 2015 at 4:40